3 ms·
Are there any theoretical limits to how much data can be encoded via fiber optics? If not, what's the current bottleneck for putting terabyte fiber in every hom
by smoldesu 5y ago
Are there any theoretical limits to how much data can be encoded via fiber optics? If not, what's the current bottleneck for putting terabyte fiber in every home? (I'm assuming it's a lack of reliable, cheap and precise hardware clocks, but I've been wrong many times before)
- baybal2 5y ago> Are there any theoretical limits to how much data can be encoded via fiber optics? Wavelength frequency/2
- Sebb767 5y agoWe already hit wavelength transfer limits (though in transmitter accuracy/viability) and can pretty easily circumvent that by transmitting different wave lengths on the same fiber. So you need to multiply this by the amount of distinct wavelengths we can use.
- deleted 5y ago[deleted]
- baybal2 5y ago> If not, what's the current bottleneck for putting terabyte fiber in every home? (I'm assuming it's a lack of reliable, cheap and precise hardware clocks, Even very poor countries these days have ftth at at least 1gbps physical interface data rate (1gbase lx/gepon/gpon). What they don't have is upstream capacity. America is unique in having tons of upstream fibre, but extremely bad last mile situation.
- deleted 5y ago[deleted]
- oceanplexian 5y agoThere’s probably a theoretical limit to fiber optic wavelength since it’s hard to create really high energy photons. But otherwise, I don’t think so.
- a1369209993 5y agoTheoretical limit is `freqency * log(energy budget / effective[0] noise floor)`, give or take a small multiplicative constant depending on how efficient your error correction is. 0: For low frequencies or (relatively) high noise, this is the actual noise floor, but for high frequencies/very low noise, the limit is that you can only send a integer number of photons, each costing some non-negligible fraction of your power budget (so the effective noise floor is (half, I think?) the power needed to send one photon per cycle).
- roflc0ptic 5y agowhat's the dimensional analysis on this equation? if we assume blue light, that's 6.66 * 10^14 Hz * log(...? / ...?) = x Tbps
- a1369209993 5y agoFor the photon quantization regime, I think we have a photon energy scaled as `hbar THz`, so a noise floor as `hbar THz^2` (1/2 photon / cycle is about 23uW at 666THz [450nm], or 19uW at 600THz [500nm]). Your Tbps is then `log(power / noise floor) * frequency` aka `log(power/0.5 hbar frequency^2) * frequency`. The effect of noise floor (and consequently quantization-regime frequency) on data rate isn't really cooperative with dimensional analysis on account of the logarithm.
- roflc0ptic 5y agothanks!
- a1369209993 5y agoAlso, to optimise data rate at a given power budget, you want to choose freq such that `d rate/d freq` is zero, which (assuming I didn't screw up the math) goes like: 0 = d/df rate = d/df (log(power/0.5 hbar freq^2) * freq) = d/df log(power/0.5 hbar freq^2) * freq + log(power/0.5 hbar freq^2) * d/df freq = 1/(ln2 power/0.5 hbar freq^2) * d/dx (power/0.5 hbar freq^2) * freq + log(power/0.5 hbar freq^2) = 0.5 hbar freq^2 / ln2 power * power / 0.5 hbar * -2 freq^-3 * freq + log(power/0.5 hbar freq^2) = 0.5 hbar freq^2 / ln2 / 0.5 hbar * -2 freq^-3 * freq + log(power/0.5 hbar freq^2) = freq^2 / ln2 * -2 freq^-2 + log(power/0.5 hbar freq^2) = log(power/0.5 hbar freq^2) - 2/ln2 so log(power / 0.5 hbar freq^2) = 2/ln2 power / 0.5 hbar freq^2 = 2^(2/ln2) freq^2 0.5 hbar / power = 2^(-2/ln2) freq^2 = 2^(1-2/ln2) power / hbar freq = 2^(1/2-1/ln2) sqrt(power / hbar) So (again assuming I got that math right), the optimal single photon frequency to use (in the quantum noise floor regime) scales with the square root of your power budget. However, at one milliwatt it's 1600THz or 187nm, and only increases from there, so for practical purposes you probably just want to use the bluest light your fiber can carry, and worry more about classical noise.