3 ms·
Neil Young is a musical genius and I don’t claim to know a thousandth of what he does about music. However, I contend that I know a whole lot more than he does
by kstrauser 5y ago
Neil Young is a musical genius and I don’t claim to know a thousandth of what he does about music. However, I contend that I know a whole lot more than he does about sound, because every time he’s ever opined about the physics of sound recording, it’s clear that he refuses to learn about it. Like so many self-labeled audiophiles, he “knows” how things work and won’t let anyone tell him differently.
- WalterBright 5y agoI've also been suspicious of his audiophile opinions because his hearing must have been damaged by decades of loud music, so how can he hear these fine distinctions?
- kstrauser 5y agoFor sure, and also normal non-superstar age-related high frequency hearing loss starts to make a big difference.
- agumonkey 5y agophysics/acoustics only go so far when dealing with art I remember like fm quality more than cd, the involontary mix sounded "better" musically, even though half the details went through the window Also customers are never in control of the audio processing pipeline. You can have crystal clear mathematics at one point but lacking mic setups, bad studio.. so you'll get clear shit. All this in the possibility that back in the days, before digital-to-digital, people paid more attention on all the links of the music production chain (something I cannot attest but read a few times).
- kstrauser 5y agoI think that’s true. See also, the Loudness War (https://en.wikipedia.org/wiki/Loudness_war https://en.wikipedia.org/wiki/Loudness_war). It doesn’t matter what tech you’re using if the final master is ruined.
- gwbas1c 5y agoA lot of CD players in the early 80s had real flaws that impacted audio quality. It wasn't until the early 90s that digital audio (and CD players) were reliably good. This article describes a lot of the problems with early DACs in the 1980s: https://www.stereophile.com/content/pdm-pwm-delta-sigma-1-bit-dacs https://www.stereophile.com/content/pdm-pwm-delta-sigma-1-bi... > But they didn't go for the Burr-Brown solution of adding an adjustment pin to the converter chip, prescribing the use of an external trim pot, and praying for constant temperature. Yikes! Some early CD players' sound quality was temperature dependent!
- mc32 5y agoMaybe that was so, but this was Neil Young and Steve Jobs introducing uncompressed audio in 2012, not mid '80s, so neither one of them is making sense. As I linked elsewhere this is Monty's response: https://web.archive.org/web/20160304013821/http://people.xiph.org/~xiphmont/demo/neil-young.html https://web.archive.org/web/20160304013821/http://people.xip... And explained via Video: https://www.xiph.org/video/vid2.shtml https://www.xiph.org/video/vid2.shtml
- TedDoesntTalk 5y agoAll you really need to know is Nyquist's thereom "A bandlimited continuous-time signal can be sampled and perfectly reconstructed from its samples if the waveform is sampled over twice as fast as it's highest frequency component." This is where the magic 44.1 Khz sampling rate comes from. It is twice the limit of human hearing at 22 Khz. Now I don't really understand why 16-bit or 1-bit makes a difference. Maybe someone can explain that to me.
- cillian64 5y agoNyquist’s theorem only covers sampling (turning a “continuous” signal (which exists at all points in time) into a “discrete” function (which only exists at certain points in time)). Each of the Nyquist samples is a real-valued number which can take an infinite number of values. To get from Nyquist samples to something we can actually represent digitally we need to do a second step: quantisation. This is where we take the real- valued samples and quantise each to one of a fixed set of values. The bit-depth determines the number of values we can quantise to. The higher the bit depth the more values we can quantise to and so the less error introduced by quantisation. You can think of quantisation error as introducing a noise term which gets added onto your signal. Higher bit depth lets you either reduce the amplitude of quantisation error or increase the range of signals you can represent (this is called dynamic range). Once you get to about 16 bits the quantisation noise is inaudible in even the quietest listening environments while at the same time the dynamic range is high enough to cause instant hearing damage. So, in a similar way to Nyquist telling us that more than 44kHz sample rate is pointless, dynamic range tells us that more than 16 bit depth is pointless (for playback. Things get a little more complicated for recording and editing). Edit: as linked by another commenter, Monty from Xiph explaining it better than me: https://web.archive.org/web/20160304013821/http://people.xiph.org/~xiphmont/demo/neil-young.html https://web.archive.org/web/20160304013821/http://people.xip...
- mc32 5y agoHere's a good response by Monty from Xyph: https://web.archive.org/web/20160304013821/http://people.xiph.org/~xiphmont/demo/neil-young.html https://web.archive.org/web/20160304013821/http://people.xip...
- kstrauser 5y agoAlso: 16-bit/44.1KHz is literally orders of magnitude better at reproducing waveforms than vinyl. If you like the sound of vinyl, you can return a turntable’s output with a good ADC and then listen to a near-exact copy of it as often as you’d like. It’s impossible to do the reverse.
- TedDoesntTalk 5y agoAll you really need to know is Nyquist's thereom "A bandlimited continuous-time signal can be sampled and perfectly reconstructed from its samples if the waveform is sampled over twice as fast as it's highest frequency component." This is where the magic 44.1 Khz sampling rate comes from. It is twice the limit of human hearing at 22 Khz. Now I don't really understand why 16-bit or 1-bit makes a difference. Maybe someone can explain that to me.