4 ms·
I wanted to implement a KVM on my pi (a while back). I had the usb hdmi capture dongle. What prevented my from finishing the project was getting power in and
by m463 5y ago
I wanted to implement a KVM on my pi (a while back). I had the usb hdmi capture dongle. What prevented my from finishing the project was getting power in and usb out on the pi connector.
It required a custom cable that I didn't want to build myself. Are cables of this type more readily available now?
- mtlynch 5y agoThere are a couple of vendors (including me[0]) that offer a circuit board that splits the Pi's USB-C port into separate data and power ports with reverse current protection. There are cables that do the same thing, but they don't provide reverse current protection. If there's a voltage difference between the USB port on your target system and the PSU feeding your Raspberry Pi, you can mess up the system's USB port or damage your Pi.[1] [0] https://tinypilotkvm.com/product/tinypilot-power-connector https://tinypilotkvm.com/product/tinypilot-power-connector [1] https://github.com/tiny-pilot/tinypilot/wiki/Powering-your-TinyPilot-safely https://github.com/tiny-pilot/tinypilot/wiki/Powering-your-T...
- kcb 5y agoThis is probably all sorts of improper. But I've used a cable like this https://www.amazon.com/gp/product/B08C5FWQND/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B08C5FWQND/ref=ppx_yo_dt_b... . Then 5V USB-C power supply into the USB-C connector and a USB-A to USB-C cable into the motherboard which had a USB-C port. You could probably also find a USB-A male to male cable and use that if your motherboard doesn't have USB-C.