3 ms·
“Likely to ensure compatibility with older Sega software, it was limited to a two-button controller.” I don’t understand this. Is this just a guess or is there
by Waterluvian 5y ago
“Likely to ensure compatibility with older Sega software, it was limited to a two-button controller.”
I don’t understand this. Is this just a guess or is there some reason you can’t just ignore extra buttons with older games?
- nicole_express 5y agoIt's just a guess. There are compatibility issues with some Master System software and the later Genesis controller which added additional buttons, though the specific issues in those cases wouldn't have been possible on the SG-1000.
- bane 5y agoI'm not exactly sure about the Master System [1], but many systems of the time send an 8 bit vector at 60 Hz to indicate what buttons were pressed. Each bit represents some action on the system e.g. bit 0 - up bit 1 - left bit 2 - right bit 3 - down bit 4 - button 1 bit 5 - button 2 bit 6 - start bit 7 - select This means that it was fairly easy to do some simple bit twiddling to read what buttons were pressed and what wasn't. Example: left+up+button 1 would produce a vector like: 11001000 1 - The bit layout is here under "Joypad Ports" and it's actually kind of interesting and a bit more complex than my simple example, but the method is the same. https://www.chibiakumas.com/z80/MasterSystemGameGear.php https://www.chibiakumas.com/z80/MasterSystemGameGear.php It looks like they maybe could have fit extra buttons in under the third port (&00) but never did. It's likely they tried to maintain backwards compatibility with previous systems like the SG-1000, only adding something new when the Gamegear came out. Here's some more on how the NES handles this http://www1.cs.columbia.edu/~sedwards/classes/2007/4840/reports/TupacMan.pdf http://www1.cs.columbia.edu/~sedwards/classes/2007/4840/repo...
- LAC-Tech 5y agoThat makes sense - but why was that abandoned in the 16 bit era? Neither the sega megadrive nor the super nintendo have 16 inputs.
- fredoralive 5y agoSMS wires each button to a seperate pin on the connector in a variant on the Atari style controller port. Megadrive has a Master System backwards compatability mode (and the same 9 pin port), so its controller ports are going to be similar 8 bit IO ports. It adds extra buttons using a spare line as a select / multiplex output and reading the input lines multiple times. Nintendo used shift regiters in its controllers, and the SNES does use a 16 bit shift register, but some of the bits are unused (4 extra buttons deemed sufficient it seems).
- Nition 5y agoFor the record, you could plug a Sega Genesis controller into a Master System and it worked (at least with the games I had) despite having more buttons. The B and C buttons became the main two buttons.
- city41 5y agoThere's about ten games that require a SMS controller to work.
- crtasm 5y agoThere was only a D-pad and two buttons on the Master System, no Start or Select. The console itself had a single 'pause' button that I suppose might have been wired into the joystick circuit though.