2 ms·
> That's digital circuitry, and it's hard to make analogue and digital circuitry play nicely together on the same circuit board; the digital part tends to influ
by dragontamer 5y ago
> That's digital circuitry, and it's hard to make analogue and digital circuitry play nicely together on the same circuit board; the digital part tends to influence the analogue part through the power lines.
Yeah. We can fortunately handwave a lot of those issues away by:
1. Working with an Arduino, which only has a 20MHz clock (best case), maybe 4MHz typical scenario.
2. Filtering down the white-noise to the Arduino-level speeds. (Note: Arduino / ATMega328pb ADC clock is only a fraction of its primary clock).
After all: sampling at 100MHz (generating a bit every 10 nanoseconds) would be very difficult! But sampling this at 1MHz is really easy, and probably could be done on a breadboard and hobby equipment.
It'd still be noisy as all heck, but running things slowly and at 5V will solve a lot of issues that faster clocks make difficult. You don't care about 100MHz noise when your circuits are only 1MHz!!
--------
Now if someone actually wanted that 100MHz (10 nanosecond) random bit generator... okay. That's tough. Now we gotta talk about ADC / High Speed Comparators, high-frequency / more expensive buffers / filters / opamps, miniscule errors, well done PCB-circuits, maybe even transmission line theory, large planes of copper to stabilize circuits... power-network filtering... etc. etc.