4 ms·
The board had probably developed a short somewhere because one of those tiny ceramic SMD capacitors had failed which is very hard to tell just by looking at it.
by Laforet 5y ago
The board had probably developed a short somewhere because one of those tiny ceramic SMD capacitors had failed which is very hard to tell just by looking at it. Or the PCB substrate may have degraded, allowing two traces to come into contact but this is less likely.
The tech probably figured out that this was happening but was unable or unwilling to isolate the issue.
- bayindirh 5y ago> The tech probably figured out that this was happening but was unable or unwilling to isolate the issue. I suspect. It was just a run of the mill repair shop. If he had found it, it would have warned me when I told him about my future intentions.