3 ms·
A had an awesome (for its time), Hyundai L90D+ monitor, and used it for ~8 years. One day it turned and stayed off, sent it to some local shop for repair, and
by bayindirh 5y ago
A had an awesome (for its time), Hyundai L90D+ monitor, and used it for ~8 years.
One day it turned and stayed off, sent it to some local shop for repair, and the tech told me that he added another light control circuit and, my brightness had to be adjusted via an external control. He also said that two ICs damaged, and he cannot source any.
I got pissed, found the parts, removed the other abomination and changed the damaged parts myself.
The monitor came back alive for 30 seconds and then died again.
It had no leaky caps, no visible damage, nothing on the board.
Had to trash it.
So, YMMV.
- Laforet 5y agoThe board had probably developed a short somewhere because one of those tiny ceramic SMD capacitors had failed which is very hard to tell just by looking at it. Or the PCB substrate may have degraded, allowing two traces to come into contact but this is less likely. The tech probably figured out that this was happening but was unable or unwilling to isolate the issue.
- bayindirh 5y ago> The tech probably figured out that this was happening but was unable or unwilling to isolate the issue. I suspect. It was just a run of the mill repair shop. If he had found it, it would have warned me when I told him about my future intentions.