4 ms·
> PS: Also scroll compressors are substantially more energy efficient than rotary and various means of staging is even more efficient yet. PPS: Also the effici
by ajross 5y ago
> PS: Also scroll compressors are substantially more energy efficient than rotary and various means of staging is even more efficient yet.
PPS: Also the efficiency of a heat exchanger cycle has very little to do with the individual losses of the compressor components. Engine losses matter at the compression ratios you see in a combustion piston, but at the scale coolants run at (especially ones like in an AC that involve a phase change) it's almost noise when compared with the fundamental thermodynamic limitations. You can do a little better for sure; 33% lower friction losses seems reasonable.
But you can't do much better: the linked article is surely not talking about 33% better overall cooling efficiency, that sounds insane to me.
- rainbowzootsuit 5y agoI agree about the 33% efficiency doesn't make any sense from a thermodynamic perspective. The discussion of the peak current for the compressor motor is quite strange. That is a fraction of a second that the system experience the Locked Rotor Amps (LRA). It is also solvable when a system has variable compressors or inrush current limiting. One bit of reasonable efficiency gains to be had is by switching refrigerants to an R22 analogue. R22 is banned per the Montreal Protocol as of 2020. However, R22 has thermodynamic properties that make it more efficient than the standard refrigerant of today's residential and small commercial units, R410A. This is particularly as the heat of the atmosphere being rejected into rises with some Coefficient Of Performance (COP) differences in the 10% range. https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=860880 https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=86088... There are some analogues to R22 without the ozone damaging properties that share or exceed the the thermodynamic performance of R22. R407C is one that comes to mind, but there's a handful that can be retrofitted or purchased new. However, a trade off is that generally a newer Energy Star unit will be significantly more efficient than an older R22 unit. My point with the R22 is that the industry will slowly move towards some of these other refrigerants because of their better thermodynamics.