2 ms·
This looks like a problem of "flat hierarchy" - there's no one responsible for anything. If a problem arises, we all just scratch our heads for a while and go b
by thaumasiotes 5y ago
This looks like a problem of "flat hierarchy" - there's no one responsible for anything. If a problem arises, we all just scratch our heads for a while and go back to sleep.
> I noticed that someone had placed an oscillating fan inside the ductwork, just before the indirect heater. “What’s this for?” I asked the plumber.
> “I’m trying to blow the heat upstairs,” he said. “It doesn’t seem to be working, though, and that’s what’s got me stumped. Heat rises.”
> “Actually, it doesn’t,” I said. “Hot air rises.”
> “Well, same thing, right?”
> “Not exactly,” I said. "Hot air will rise, but only if cold air can take its place."
> “I don’t get it.”
> “Come here; I’ll show you.” I followed the large sheet-metal duct back to where it met the foundation wall. “Where does this go?” I asked.
> “Outside,” he said.
> “Where outside?”
> “I don’t know,” he said. “I don’t do outside. I do inside.”
[...]
> I waded into the greenery and stomped around on it for a while. “The gardeners aren’t going to like that,” the plumber said.
> “It’s okay,” I said. “I do outside.”
> And that’s when my stomping made a hollow sound. I smiled. “Got a shovel?” He went to get one and I waited, and while I waited, I thought like air. If I were air, how would I get into this house? He came back in a few minutes and handed me the shovel. I dug down about six inches and hit plastic. Clear plastic. I moved some more of the dirt out of the way and saw the metal bars of the old air-inlet grate.
[...]
> When the gardener showed up, I explained what we were doing and how the air wouldn’t move across the red-hot indirect heaters because there was no fresh air coming into the house. He understood but then explained how ugly those ground-level grates were and how they had decided to cover them all with sheets of clear plastic, topsoil and pachysandra. “That’s why the house is cold,” I said.
> The gardener pointed to the plumber. “It’s his job to keep it warm. It’s my job to keep it green.”
> “The problem’s outside,” I said. “He doesn’t do outside. You do.”
> And we went back and forth like that for a while until the gardener reluctantly agreed to remove one of the clear plastic sheets, just to prove me wrong.
Clearly, the ultimate fault lies with the original architects, who unfairly designed a heating system that existed both outside and inside the house. But it's also interesting to note that the plumber's entire job was to understand how the house worked, and not only did he not understand it, he didn't seem to feel there was any reason why he should understand it.
- jaclaz 5y ago>This looks like a problem of "flat hierarchy" - there's no one responsible for anything. Yep, and it happens all the times, a classic example in construction are fan-coils: 1) the plumbers have in their contract the installation of the (new) fancoils for heating/air conditioning, they mount them and connect them to water lines. 2) the electricians bring nearby the electric line to power them. 3) none of the two have explicitly in their contract the chore of actually connecting the power to the fan-coil, the plumbers say that it is electrician's work, the electrician's say that it is included in plumbers work as they only have to bring the line.
- mcculley 5y agoI had a similar problem with my last house. The hot water system was connected to the A/C which had a heat pump. The A/C was supposed to help heat the water. When it failed, it was difficult to find a plumber who understands such systems and the A/C guys were uncomfortable with a hot water system connected to the A/C system.
- LurkerAtTheGate 5y agoThis was exactly my fear when designing my new house - I wanted to build a hybrid (heat pump and gas furnace) air-conditioning and water-heating system for a home in a climate with very cold winter and increasingly hot summer. Despite providing charts on efficiency & cost savings, and a detailed plan for installation, I eventually gave up. If I couldn't make builders, plumbers & HVAC techs understand, I'd never be able to get it serviced; If the techs couldn't understand it, I'd never get a future buyer to understand it either.
- jaclaz 5y agoWell, that is another issue: no (or limited) competence of the plumber. At least here (Italy) we have two kind of workers: 1) generic plumbers (BTW also perfectly capable of installing a new A/C system or boiler, furnace, etc.) 2) specialized "boilermen" or "heat engineers", i.e. people that do the maintenance and repair of them The level of competence of #1 above is - generally speaking - excellent, whilst the level of competence of #2 greatly varies, particularly when the issue at hand is not "normal maintenance" but rather a malfunctioning, and even more so if it is an electronic/controller related one. Even if manufacturers do provide courses to (hopefully) keep the maintenance crew up to date with specific new machinery, these courses are often completely unuseful (as they are often theory only and very little real-life or actual field related) or they are terribly conceived or taught, with the result that only a very limited number of people taking them actually understand them fully. To give you an example, I often deal with a "largish" plumber firm that has some 15 people, of which some 10 are "generic" plumbers and 5 are "specialized" on HVAC, A/C, boilers, etc. Of these 5 people, only 2 (IMHO) are good in problem solving, and only 1 is at the level where all of them should be. This latter guy is often called directly by this or that manufacturer to go and solve for them issues even 3-400 Km away, which should mean that he is a rare resource. And every year the manufacturer engineers add some more complexity to the machines (no matter if for a real bettering or not) completely disregarding the need of forming the maintenance and repair personnel. There is also an underlying education problem, some machines are getting so complex that only someone with a graduate engineer level has the competence to troubleshoot some issues, but of course no graduate engineer would ever dirty his/her hands in a plumber job.