49 ms·
It seems to me like 10Gbps is already “cheap enough” to use where it’s appropriate. DAC (copper) is crazy cheap and fiber/UTP are also pretty cheap. 30m (~100 f
by sokoloff 5y ago
It seems to me like 10Gbps is already “cheap enough” to use where it’s appropriate. DAC (copper) is crazy cheap and fiber/UTP are also pretty cheap. 30m (~100 ft) OM3 fiber is $25 retail; SFP+ 10G fiber modules are $20.
- tremon 5y agoThe modules and NICs are in the affordable range for network enthusiasts, yes. But I haven't been able to find 10GBase-T switches at consumer prices yet. Do you have some pointers/recommendations?
- pdimitar 5y agoMikrotik have 2-3 great 10GbE switches in the $250-$400 range, if memory serves.
- sokoloff 5y agoHave a look at the Microtik CRS305-1G-4S+IN. 4 10Gbps SFP+ ports with an MSRP of $150 and a street price just under that. For direct connections (NAS to VM host, for example), you can also forgo a switch and wire them directly on a private point-to-point network.
- vbezhenar 5y agoHow do you connect fiber? I thought you need very expensive soldering tool which stopped me from looking at fiber for home network.
- sokoloff 5y agoBuy pre-terminated fiber patch "cables". They have ends on them (LC is the common one) and plug in like pre-terminated Ethernet cables. Terminating bulk fiber does require special tooling, but is generally not needed for a home installation.
- ksec 5y agoI never thought about using Fibre at home. Especially when I have CAT6 cable already installed. How does Pulling Pre-terminated fibre walks? Doing it the same as Copper cables? I thought fibre cable were more brittle which makes home installation a no go? This is interesting because I guess most are like me, all fixated on Copper Ethernet and never once thought about Fibre!
- sokoloff 5y agoThey’re not as strong as copper UTP, but they’re not outrageously fragile either. If they get tangled or twisted in a data center application, you can tug on them as needed to disentangle them without worry. I pulled finished fiber through conduit to my garage (fiber is much better than copper for detached buildings). That was an el, two 90s, a 45, and about 17 meters of straight conduit pulled with a poly line. Worked fine. In a case like yours (assuming you have at least Cat6 copper UTP in the wall), I’d surely just buy the slightly more expensive RJ45 transceivers.