4 ms·
Cant wait for all of those to arrive. We have a sort of stagnation in the past 4-5 years and only only just started moving again. Network, Storage and Compute.
by ksec 5y ago
Cant wait for all of those to arrive. We have a sort of stagnation in the past 4-5 years and only only just started moving again. Network, Storage and Compute.
For consumer I really hope we will get 5GBASE-T. Even if it is just one port on the Router would be better than 1Gbps port.
- jonatron 5y agoFiber is easy if you buy fiber patch cables, and just coil up the excess. Copper just has limitations, I wouldn't be surprised if there's no real progress in copper networking in the next few years.
- lxchase 5y agoI believe some prefer Copper despite length limitations or interference, because it’s less power and heat compared to fiber and the receiver to translate the light.
- wmf 5y ago2.5G/5G/10GBaseT is probably higher-power than fiber.
- sleepydog 5y agoI've been considering getting fiber to connect two switches on opposite ends of my apartment. The distance is short enough that I could use a slim Ethernet cable, but even the slim ones are pretty noticeable. Fiber cables can be incredibly thin. I did research, and the problem I found was that there is very little availability for fiber cables of alternative colors. Most of the cables I found that were the right type and thickness I wanted, I could only find in bright yellow that would stick out. There are a few products like invisilight that are incredibly thin and almost clear which would be ideal. However, they're only sold in bulk to businesses so I could only find some on ebay. It felt too adventurous for me to pull the trigger. Currently 5Ghz wifi is sufficient, but its bad enough that I refrain from doing anything that consumes a lot of bandwidth, like torrenting.
- kingosticks 5y agoDo you have coax connections in each room? If so, is ethernet over coax an option?
- sleepydog 5y agoI do not have coax. Power line ethernet is an option, but I've heard mixed stories about latency/loss.
- candiddevmike 5y agoThe color of fibre optic cabling jackets typically signifies the type of mode/distance it supports, unlike CAT5/6 where it's insignificant. https://www.thefoa.org/tech/ColCodes.htm https://www.thefoa.org/tech/ColCodes.htm
- sokoloff 5y agoIt seems to me like 10Gbps is already “cheap enough” to use where it’s appropriate. DAC (copper) is crazy cheap and fiber/UTP are also pretty cheap. 30m (~100 ft) OM3 fiber is $25 retail; SFP+ 10G fiber modules are $20.
- tremon 5y agoThe modules and NICs are in the affordable range for network enthusiasts, yes. But I haven't been able to find 10GBase-T switches at consumer prices yet. Do you have some pointers/recommendations?
- pdimitar 5y agoMikrotik have 2-3 great 10GbE switches in the $250-$400 range, if memory serves.
- sokoloff 5y agoHave a look at the Microtik CRS305-1G-4S+IN. 4 10Gbps SFP+ ports with an MSRP of $150 and a street price just under that. For direct connections (NAS to VM host, for example), you can also forgo a switch and wire them directly on a private point-to-point network.
- vbezhenar 5y agoHow do you connect fiber? I thought you need very expensive soldering tool which stopped me from looking at fiber for home network.
- sokoloff 5y agoBuy pre-terminated fiber patch "cables". They have ends on them (LC is the common one) and plug in like pre-terminated Ethernet cables. Terminating bulk fiber does require special tooling, but is generally not needed for a home installation.
- ksec 5y agoI never thought about using Fibre at home. Especially when I have CAT6 cable already installed. How does Pulling Pre-terminated fibre walks? Doing it the same as Copper cables? I thought fibre cable were more brittle which makes home installation a no go? This is interesting because I guess most are like me, all fixated on Copper Ethernet and never once thought about Fibre!
- dnautics 5y agoA minimal used 10Gbps switch from a cloud-provider grade mfg (arista, cisco, juniper) will run you ~5k, which is pretty expensive. But they are really loud and most people shouldn't put them in their homes. Microtik is probably good enough for most home serving usage (honestly it would probably be good enough for a small cloud too), and is much cheaper, and way quieter.
- pdimitar 5y agoI am still pondering buying a 10GbE Mikrotik switch. There are 1 or 2 models without a fan -- or such that ServeTheHome says don't make a lot of noise but I'd still be super hesistant to use those -- and I haven't pulled the trigger yet. Do you have any experience with them? Any pros and cons?
- dnautics 5y agoI've only ever configured a mikrotik router in the datacenter and it was a good experience. We did not wind up deploying it though so I can't speak to it's reliability, uptime, or anything. PS hi pdimitar ;)
- unixhero 5y agoDual 10gbe pcix costs usd 250 from China. It is already here.