4 ms·
Here's a useful slide deck from ORNL (2017): https://gain.inl.gov/SiteAssets/MoltenSaltReactor/Module2-OverviewofMSRTechnologyandConceptsML17331B114.pdf https:
by pfdietz 5y ago
Here's a useful slide deck from ORNL (2017):
https://gain.inl.gov/SiteAssets/MoltenSaltReactor/Module2-OverviewofMSRTechnologyandConceptsML17331B114.pdf https://gain.inl.gov/SiteAssets/MoltenSaltReactor/Module2-Ov...
Note page 23! Almost all the 137Cs ends up outside of the core, due to sparging of precursors. "Over 40% of [fission products] leave core"
Lots of other issues, particularly with radiation damage and corrosion of reactor structural elements. Unlike in a solid fuel reactor, there is fission going on right at the boundary of the salt. In a LWR, there is a layer of water between the fuel and the reactor structure to provide shielding. There will be non-fuel components of a MSR that are not lifetime components, but will have to be swapped out due to degradation. Some MSR designs are proposing to just swap out the entire reactor vessel because of this.