3 ms·
Airplane engines are overwhelmingly air-cooled, fixed timing (after starting), pilot-controlled fueling, and expected to produce 100% of rated power for 5 minut
by sokoloff 5y ago
Airplane engines are overwhelmingly air-cooled, fixed timing (after starting), pilot-controlled fueling, and expected to produce 100% of rated power for 5 minutes and then 65-75% of rated power for hours on end.
Automotive engines are overwhelmingly water-cooled [providing a far more stable and lower cylinder head temperature], variable/computer-controlled timing often with knock sensing [providing the means to adjust timing dynamically when anything beyond light pinging is detected], closed-loop fuel control, and rarely producing more than 20% of their rated power.
Aircraft engines need to stay together with a cylinder head temperature of 460ºF, fixed timing, and fuel mixtures that are set by the pilot. It's a far more demanding (and less controlled) environment.
Some additional refs that might be interesting:
https://www.avweb.com/features/pelicans-perch-43detonation-myths/ https://www.avweb.com/features/pelicans-perch-43detonation-m...
https://www.avweb.com/features/pelicans-perch-55lead-in-the-hogwash/ https://www.avweb.com/features/pelicans-perch-55lead-in-the-...
https://www.avweb.com/features_old/pelicans-perch-31those-fire-breathing-turbos-part-1/ https://www.avweb.com/features_old/pelicans-perch-31those-fi...
- maxcan 5y agoSmall nitpick but while aircraft engines cannot catastrophically fail at 460F, no one should be flying them that hot. Its basically guaranteed to shorten the TBO on the engine that way. When I was flying a turbocharged cirrus (notoriously hot running engine) we always kept the cylinder heads to 380F. It limited our climb performance but was so much better for the engine.
- sokoloff 5y agoI agree. I use 380°F as my soft limit for a TNIO550B and take more aggressive action at 395°F. Nevertheless, it’s a certification requirement that the engine have appropriate detonation margin at the manufacturer’s declared CHT redline and TCM/CMI has chosen to put their redline around 75°F higher than I’m comfortable in normal operations.
- maxcan 5y agoI just went under contract for my first turboprop.. the numbers there are nutty. The engine can sustain 840C, it can go to 870 for less than 20 seconds and it can even sustain 1000C for up to 5 seconds without triggering any kind of exceedance.