3 ms·
If you're making that comment then I don't believe you understand how simple the brake systems in our cars are, or other systems are. Swapping rotors and pads o
by iamtheworstdev 5y ago
If you're making that comment then I don't believe you understand how simple the brake systems in our cars are, or other systems are. Swapping rotors and pads on all four wheels can be done in an hour on most cars, trucks, SUVs, etc. And on most vehicles there's more bolts involved in removing the wheels than the pads and rotors. Hell, even rebuilding an entire caliper is a simple job.
If you don't want people tampering with the ECU or ABS controller (if the vehicle has ABS) then I get that. But a blanket statement like "average joe can't touch the brakes" is horribly ignorant.
- gmueckl 5y agoThe brake system is one of these things that are literally lifesavers when they work and killers when they don't. I think that it's a good idea to have every part of that system - especially the easily accessible mechanical parts - off limits to untrained tinkerers. You can't undo injury or death that can result easily from a faulty brake.
- wiseleo 5y agoVery funny. On my car: remove 5x 19mm lugnuts, remove wheel, reinstall 2x lug nuts, remove 2x 21mm caliper assembly bolts, remove the caliper assembly, use a 4" C-clamp over the existing used inner brake pad to retract the caliper piston, replace pads, reinstall caliper assembly, reinstall 21mm bolts to secure caliper assembly to steering knuckle, remove 2x lug nuts, reinstall wheel, install 5x lug nuts torqued to 85ft/lb. Need to swap rotor? It's only secured by 2 of those lugnuts, so just do it then. What's dangerous? It will not allow you to do it wrong because parts will not fit. You need exactly two sockets: 21mm and 19mm.