5 ms·
I was on the train a week ago. Of the three of us sitting at the table who got on at Boston, one was going to Philadelphia, one was going to Wilmington, and one
by jcranmer 5y ago
I was on the train a week ago. Of the three of us sitting at the table who got on at Boston, one was going to Philadelphia, one was going to Wilmington, and one was going to Baltimore.
One of the chief advantages of trains is that you do not have to cater only to point-to-point routes; you can instead serve a combinatorial explosion in routes for comparatively little time: a stop adds only ~5 minutes to a HSR train, and that's the worst-case scenario.
There is no advantage to bypassing Philadelphia: the amount of money it costs to bypass the city is going to be quite large, and you will miss out on all the potential revenue from stopping at the city itself. From my practical experience riding the train, the biggest factor in existing slow trains in Connecticut isn't all the stops it makes in Connecticut, but the incompetence of Metro North's dispatching that keeps a high-speed train plodding along below highway speeds between stations.
(Also, side note: Philly's MSA is larger than Boston's, and Philly provides more Amtrak riders than Boston's 4 stations combined--and one of those isn't even on the NEC!).
- JumpCrisscross 5y ago> no advantage to bypassing Philadelphia Trains spend a lot of time speeding up and slowing down. A single stop adds much more than five minutes to total transit time. [EDIT: Apparently this doesn't apply to maglev. This could be a game changer for HSR in the American political landscape.]
- sudosysgen 5y agoMaglev trains can start and stop much, much faster than regular trains.
- JumpCrisscross 5y ago> Maglev trains can start and stop much, much faster than regular trains Ah, wasn't aware of that. Thank you.
- jcranmer 5y agoConventional trains' acceleration profiles are already limited by passenger comfort rather than engineering difficulties. Being able to start and stop much faster isn't helpful if it's already outside maximum operating guidelines.
- sudosysgen 5y agoI was under the impression this wasn't the case. Passenger planes accelerate at around 3.5m/s/s. That's 100km/h every six seconds.
- jcranmer 5y agoAnd when planes take off, all the passengers and crew are seated in seats with fastened belts, all luggage is stowed, and tray tables are closed. By contrast, when a train departs a station, there are frequently passengers who are still roaming the aisle with their luggage. And I might have a cup of coffee or something sitting on the table in front of me (or behind me, from the perspective of the train's direction of acceleration).
- sudosysgen 5y agoOf course, you shouldn't have people roam in the aisle if you want to accelerate faster. If you're seriously considering rail as an alternative to airtravel, and at 600km/h you are, then having people stow their luggage and sit down is not a serious issue. For the sake of comparison - a Toyota Corolla will do 100km/h/6s. You don't need to fully stow your cargo, you just need not to have drinks on the table. Even standing you would be fine, though there is some danger you'd trip. Beyond that, buses see accelerations on the order of ~0.2G often, and that's with people standing up, in an unpredictable fashion.
- jcranmer 5y agoThe root context of this discussion is basically whether or not it makes sense to add in intermediary stops on a rail line. If you're insisting that people have to be seated and have no drinks out for every intermediate stop, that rather sharply raises the discomfort level of stops. Another unpredictable element of train acceleration is the need to slow down to negotiate a curve, which isn't necessarily the case only in the immediate vicinity of a station. FWIW, the numbers I generally see bandied about for acceleration on (decent) trains is about 1 m/s^2.
- bluGill 5y ago> A single stop adds much more than five minutes to total transit time. [EDIT: Apparently this doesn't apply to maglev. This could be a game changer for HSR in the American political landscape.] That is false even for non mag-lev. Do the math as I did: at .7 m/s/s (which is what shinkansen does) it takes less than 90 seconds to get to 300 km/h. That leaves far more time than is needed at the station (1 minute is plenty if the train is designed right). You don't count stop time at all because it averages out with the acceleration.
- majormajor 5y ago> a stop adds only ~5 minutes to a HSR train, and that's the worst-case scenario. Is that accurate? When I road HSR in Japan, I remember the speed in-city being much lower than in the countryside, so bypassing cities seemed key to maintaining the high speed part.
- sudosysgen 5y agoOld HSR, yes. Maglev? No. The issue is that steel wheels on steel tracks doesn't provide enough grip to accelerate, so the train takes a lot of the time to get up to speed. Maglev, meanwhile, uses a linear motor, so you can accelerate very fast if you want to.
- majormajor 5y agoI think the bigger constraint would be noise. Wikipedia talks about a 70dba noise limit in residential areas after protests and such, but doesn't say what speed exactly they're running at to meet that. 70dba is rather a lot, though, I imagine you'd end up with a lower limit in the US since I don't think most people are going to be easily convinced that another inter-city transit method is going to be worth the noise to them.
- jcranmer 5y agoSo the penalty I'm calculating is the stop penalty of slowing from a cruising speed to a dead stop, waiting at the station, and then speeding back up to cruising speed versus maintaining cruising speed the entire distance; you can think of this as the time penalty that the Route 128 stop generates (being on a nice straight track that allows very high speed). What you're talking about instead is the penalties imposed by a more constrained right-of-way in urban environments. Except when we're talking about Philadelphia (or most of the Northeast in general), you can't really escape from a constrained right-of-way anyways--a quick crayoning suggests you're adding about 20 miles of railway route which, even at 200mph, adds more time than you're saving by itself. Consider again the cost of bypassing to save time. How many millions of dollars are you willing to save a minute of travel time? It is far cheaper to put that money into straightening the worst curves of legacy inner city track than to spend it bypassing the city altogether, not even accounting for the loss of revenue by not serving what are objectively large cities.
- mimixco 5y agoSpeaking only from my own experience, HSR stops take a lot longer than that. It takes the TGV five minutes to slow down and approach the station! The TGVs I've ridden also do not do fast turnaround at stations. They sit there, like airplanes, while people board for the (obviously longer) trip. Yes, it's faster than an airplane to turnaround (less TSA nonsense, etc.), but not 5 minutes and not like a local or regional train, in my experience. The whole reason the Houston to Dallas route is workable is that it does not stop at all in between.
- bluGill 5y agoTVG is a badly designed system and so it uses far more time to both at the stop and in acceleration. Try looking at shinkansen for an example of what is should be.
- JKCalhoun 5y agoI've had this idea of feeder trains that rendezvous with the primary train by pulling along side, matching speed. Then a brief and orderly movement of passengers between feeder & primary train occurs. When complete, the feeder train disengages, slows back down — the primary train continues to its next destination. Feeder trains bring new passengers on board the primary train. They leave the station a little ahead of the incoming primary train in order to accelerate up to its speed just at the rendezvous point. Another empty feeder had already rendezvoused with the primary before the station and passengers disembarking were offloaded onto it. In short, the feeders can be small. The primary train need not stop at all the points in between. I would love to model this graphically.