4 ms·
This is a nice build. One tiny change I'd make is because I'm paranoid about the pokey power switch lever. It might be at eye height, when someone is wrestlin
by neilv 5y ago
This is a nice build. One tiny change I'd make is because I'm paranoid about the pokey power switch lever. It might be at eye height, when someone is wrestling to get a heavy server on rails, or similar.
You can get aircraft-like guards that fit over that design of switch[1], or you can get a less-pokey rocker or pushbutton switches. (Note that rocker and pushbutton switches can be easier to actuate accidentally, such as when a neighboring server is being racked/unracked, but you can get those switches with guards, too.)
[1] Example: https://www.ebay.com/itm/292009956841 https://www.ebay.com/itm/292009956841
- postpawl 5y agoGreat suggestion! Added it to the list of things for V2.
- accountofme 5y agobetter yet a push button and a latching flipflop?
- p0d 5y agoI accidentally powered down a san once by knocking it's rocker switch with my elbow :-)
- mysterydip 5y ago- redundant power supplies - redundant ethernet connections - data across redundant disks ... and all of it bypased by an accidental elbow :)
- simcop2387 5y agoA latching relay would be perfect for this kind of thing, good current capacity and they're pretty reliable.
- traceroute66 5y ago> when someone is wrestling to get a heavy server on rails, or similar Don't do that !!!! Save your back, reduce risk of damage to server and rails .... use a server lift. Seriously. Trust me, when I made the change from wrestling to lift, it was a real "what the hell was I doing before" moment. If your employer or facility does not have a lift, do what you need to do to get one. At its most basic, it is, without doubt, a serious health & safety at work issue for your employer or the facility if they don't provide one.
- sgt 5y agoThat's if you do that regularly. It you rarely put in servers, there's little chance someone will buy a lift.
- traceroute66 5y ago> It you rarely put in servers, there's little chance someone will buy a lift. No excuse I'm afraid. The basic lifts are not that expensive. And you can always rent one, most of the manufacturer resellers have a rental service too. Its all fun and games thinking you can get away with it because you "rarely do it" ... until you or your colleague are off work with a bad back, or you find you've just thrown $10k worth of server on to the floor. We might be in agreement that a 1U server is feasible without a lift, as long as it is below head height. Although frankly I still prefer using a lift with 1U servers because even if the weight is not a problem, the rails are so much easier to do when you have a lift supporting the server - especially if you are using the moving target that is telescoping rails ! But once you go above 1U or above head height, you're just asking for trouble.
- glenneroo 5y agoIs there an official name for this device other than "lift"? I'm looking around for prices but I can't seem to find anything here in Europe on eBay, geizhals.eu, or anywhere else for that matter.
- 5y ago
- rainbowzootsuit 5y agoBe aware that rocker cover is designed to prevent accidentally turning the switch on. You have to leave the guard up when it's in the on position. I think I'd go for a typical rocker switch or guarded rocker if worried about eyes or eyes and elbows. https://www.digikey.com/en/products/detail/e-switch/R6ABLKBLKFF/301973 https://www.digikey.com/en/products/detail/e-switch/R6ABLKBL... https://www.digikey.com/en/products/detail/c-k/D102J12B215PQA/2055111 https://www.digikey.com/en/products/detail/c-k/D102J12B215PQ...
- nucleardog 5y agoYou can just mount the switch (or cover) the other direction so the cover stays up while the switch is off but is lowered and guarding while it’s on.
- rainbowzootsuit 5y agoThat's valid, but I think that operation makes it more of a hazard, however mild, if you leave it powered off when trying to mount the server. More likely, it's confusing with the server getting mounted with the cover closed, then the person doing this forgets or doesn't understand that it's switched on by default and plugs it in, where it will be immediately powered. Why not use a less confusing kind of switch, or leave it be with the toggle?
- neilv 5y agoGood points. I should've pointed to an example of other switches, rather than emphasizing an easy mod for the existing switch.
- rainbowzootsuit 5y agoNo worries. I think the server would look boss with airplane plane switch covers. I found a few images of translucent covers and I think that it would render the cover floppy if you were to dremel out the barrier that holds the switch in the off position as there's a pretty large coil spring in there. I looked around some but couldn't find this style cover that didn't have the off-when-closed function too. https://sinolec.co.uk/1348-thickbox_default/translucent-red-toggle-switch-safety-operator-cover.jpg https://sinolec.co.uk/1348-thickbox_default/translucent-red-... https://www.atomsindustries.com/assets/images/items/asd1637/3219_03.jpg https://www.atomsindustries.com/assets/images/items/asd1637/...