5 ms·
FWIW: raspberry pis (the 4 series) sucks in 15w which is why it’s so bloody difficult to power them through standard USB power adapters (which go up to 12w). S
by dijit 5y ago
FWIW: raspberry pis (the 4 series) sucks in 15w which is why it’s so bloody difficult to power them through standard USB power adapters (which go up to 12w).
So, not hundreds of times more power hungry, but definitely 2-3x
- ajsnigrutin 5y agoyep, which makes them a pain in the ass to efficiently cool down without active cooling (=fans)
- larschdk 5y agoMy passively cooled RPi4 with 8GiB RAM + 1GiB/USB ethernet dongle working as a 1Gb router never goes above 50 degrees C (all-metal case from aliexpress).
- geerlingguy 5y agoJust to note that's peak power consumption. They idle between 1-4W, or if you're running a PoE HAT, 4-6W.
- formerly_proven 5y agoA RPi is not equivalent to what most would use as a COTS router, which includes a GbE switch and some kind of modem (DSL or cable). The latter on its own needs a few Watts.
- geerlingguy 5y agoOn the contrary, OpenWRT and a good CM4-based board allows the Pi to run pretty well as a gigabit router :) https://www.jeffgeerling.com/blog/2021/two-tiny-dual-gigabit-raspberry-pi-cm4-routers https://www.jeffgeerling.com/blog/2021/two-tiny-dual-gigabit...
- aj3 5y agoThat’s not much of a router with just two ports and no WiFi.
- tssva 5y agoNo CM4 and accompanying carrier board needed . A regular RPi4 with a USB3 gigabit adapter makes for a good gigabit home router. I have been using one as my home gigabit router for the last 14 months without any issues.
- selfhoster11 5y agoAs another commenter already pointed out, this is peak power consumption. A Pi + external HDD runs me to 12 W max in live use. Less if the drive spins down.