4 ms·
2. write-enable for disk contents It's funny how such basic things from the past were thrown away. Every floppy disk ever had this. However, i also believe th
by reaperducer 5y ago
2. write-enable for disk contents
It's funny how such basic things from the past were thrown away. Every floppy disk ever had this.
However, i also believe that if such a thing existed for modern gear, it would only be used by 1% of people, and even then, mostly accidentally, resulting in millions of trouble tickets. So I'm not sure what the compromise is.
- WalterBright 5y agoI don't buy the argument that if not everyone uses it, nobody should get it. BTW, I would read TV repair manuals as a kid (yes, weird). There was always the "check to see if it is plugged in". Plugging TVs in made a lot of money for service people. I see similar things in car manuals for car won't start. "Put gas in it." Edit: This was back in the days when you could repair a TV with a soldering iron and a screwdriver. Every hardware store had a tube testing machine. I'd have fun by randomly swapping the tubes that fit in the same socket and seeing what effect that would have on the TV's operation.
- Stratoscope 5y agoAnd of course, blow the dust out of the connector! https://devblogs.microsoft.com/oldnewthing/20040303-00/?p=40423 https://devblogs.microsoft.com/oldnewthing/20040303-00/?p=40... I was also the family "TV tube test person" as a kid. I must have been around 6 or 7. For the young'uns, TV sets used to have tubes and hand-soldered point-to-point circuitry. Just like an ENIAC, a tube TV would always "go on the fritz" as the tubes burned out. My dad showed me how to pull out all the tubes, and we would put them in a cigar box and go to the little corner grocery, which had a tube tester in front. I would dial up all the settings for each tube and test it, and we would buy replacements for the bad ones. Take them back home and I would plug them in, and the TV worked again! Dad was always generous and made sure I got credit for it. BTW did you ever get to discharge the high voltage connection to the picture tube with a screwdriver and wire with alligator clips? One clip to chassis ground, the other to the screwdriver, then slip the screwdriver under the rubber insulated connector, and BANG! https://en.wikipedia.org/wiki/ENIAC https://en.wikipedia.org/wiki/ENIAC https://en.wikipedia.org/wiki/Vacuum_tube https://en.wikipedia.org/wiki/Vacuum_tube
- dotancohen 5y ago> I don't buy the argument that if not everyone uses it, nobody should get it. That's not the argument. The argument is that for every N people who use the feature, X*N ( X>>1 ) will accidentally enable the feature and thus require an expensive tech support call.
- mark-r 5y agoI'll never forget the time I was driving to pick up my first new car. I was 3 blocks from the dealer when my old car died. Nothing I did could get it started again. Finally a cop pulled up and asked if I was having trouble. I told him, then he asked if I had gas. Of course since I was anticipating a new car, I hadn't been paying attention to the gas level in the old one. Thankfully I was just across the street from a gas station.
- fullstop 5y agoSD cards had this, but it's up to the driver to respect that. There is nothing in hardware preventing writes, it's just a signal to software saying "Hey, please don't write to me!"
- numpad0 5y agoI don’t remember PATA(IDE) disks having Write Enable jumper settings. Apparently some parallel SCSI drives had them but pretty rare for non-removable media at all.
- WalterBright 5y agoI do remember them. I'm old.