3 ms·
The tech for producing the fibers might be just what is needed to extract energy from wind with no moving parts. What is needed is such a fiber with a surface
by ncmncm 5y ago
The tech for producing the fibers might be just what is needed to extract energy from wind with no moving parts.
What is needed is such a fiber with a surface charge–electrons–readily stripped off by passing air molecules, and slightly conductive. To collect energy, a wire grid is held erect in a steady wind with streamers of this fiber at intersection points. As the wind carries away surface charges, the grid builds up a voltage relative to the ground. Electron current flowing from the ground to replenish the charge in the grid can do work. Alvin Marks patented such a design in the '80s, without going into detail about how it would shed charge. (Alvin Marks is known for winning a bitter fight with Edwin Land, of Polaroid, for the patent on polarizing sunglasses.)
The grid would best be on a kite, with the wire to ground also the kitestring. Or it could be stretched between bridge uprights, or skyscrapers. The absolute efficiency, the fraction of wind energy extracted, is not very important if the construction and operating cost are low enough, as would be the case here. (The maximum practical efficiency of wind power extraction is about 1/3; if you try to extract more, the waste air blocks air you want to collect more from.) Stretched between existing structures, collecting too much of the energy would load the structures beyond their design limits anyway.
The real wind bonanza is way high up, thus at the end of a kitestring. Wind energy goes up as the cube of wind speed, and wind speed (and steadiness) goes up with altitude, so available energy goes up as the fourth power of altitude before leveling off. There are structural limits on how tall you can build a wind turbine, but kites follow different rules. Any absolute inefficiency could be made up with multiple grids, one behind the other.
Where to situate the kites, out of the way of air traffic, is an interesting problem. Probably the best place is on a former nuclear power plant reservation, that already has a big no-fly zone around it, and a power distribution network attachment point in the middle. There are other no-fly zones that could co-exist with kites.
At some point, all the existing wind tower blades will degrade to uselessness, and you can stretch grids between their leftover towers. The space between existing skyscraper towers is all going to waste already, and buzzing them is frowned on.
- JulianMorrison 5y agoStory prompt: the kites of Chernobyl...
- jfengel 5y agoWould a kite be stable enough to count on? It sounds very clever, but the main advantage of a windmill is that you know where it is at all times. It can't fall out of the sky if something goes wrong. (They do require some continuous monitoring, but not what I'd expect for a kite.) It would be really great to take advantage of all of that fast-moving upper air, but I wonder if it might be more practical just to live with what you get between tall buildings. Or even, conceivably, stretched out between existing windmill towers. (Though that will surely require even bigger effots to scare off the birds).
- ncmncm 5y agoMakani Power thought a kite would be stable enough. Their big mistake was in making an extremely expensive kite. (The "Lex Luthor" failing, common to Alphabet ventures.) At least, there would be no danger to birds. Even if they crashed into the grid they would probably be unharmed, and there is no reason for them to crash into it. They are not in the habit of crashing into chain-link fences, never mind fences with millions of streamers blowing from them.