5 ms·
A picture of said cabinet, which is supposedly 4 feet wide, and all the cpu boards mounted vertically occupy a pretty wide swath of that. I think it's safe to
by tyingq 5y ago
A picture of said cabinet, which is supposedly 4 feet wide, and all the cpu boards mounted vertically occupy a pretty wide swath of that. I think it's safe to assume it's more than 230 TTL chips.
https://rcsri.org/collection/vax-11-785/ https://rcsri.org/collection/vax-11-785/
- Taniwha 5y agomakes heavy use of 74181 4-bit slices - remember it's from a different age, very CISC, lots of microcode
- kjs3 5y agoLots of us built what you would call a RISC processor out of 74181/Am2901 bit-sliced processors back in the day. Mostly because we didn't have the microcode skills to do what the pros did on things like the VAX or DGs.
- erosenbe0 5y agoWell it is apples to oranges. In the late 70s, high-end RAM was maybe 250ns, so you wanted a 5mhz CPU. In order to clock that on the VAX, they implemented numerous smaller micro operations and associated specialized TTL and then used microcode. So this limited the maximum propagation delay possible for any single cycle micro-op at the expense of complexity and power. Then each macro sizsd op took variable cycles. Also, the VAX had 4 priv states, ecc capable dram controller, i/o, fault recovery and the like.
- kjs3 5y agoI was an admin on a VAX-11/780, the first generation, in the Before Times. Yeah, the basic CPU was 26 or so hex-width Unibus boards about 16"x9". Memory and I/O was extra. A lot more than 230 TTL chips. They eventually boiled it down to a couple of ASICs so you had a VAX on a single card. But to be fair, the VAX implemented a vast amount of stuff that you wouldn't if you were designing your own TTL CPU.