2 ms·
The main effect of this is the generation of DC or very low frequency AC voltages on long pieces of wire. The longer the wire, the higher the generated voltage
by mikewarot 5y ago
The main effect of this is the generation of DC or very low frequency AC voltages on long pieces of wire. The longer the wire, the higher the generated voltage and current.
In 1859 the effect was to generate high enough dc voltages to cause shocks, and ruin equipment, likely due to insulation breakdown. Modern lightning protection would handle that, were long telegraph wires in use today.
The thing everyone worries is transformers. If a transformer has no power on it, the currents available would barely cause a measurable change in temperature. (lets say 100 amps across a 1 volt drop, 100 watts of heating)
Transformers are designed to maximally use the available flux handling capacity of their core. As the flux rises, eventually a saturation point is reached... at this point, the resistance to further current increase in the coil (the inductance) drops rapidly, leading to a surge in current at the top of the AC cycles, which then leads to rapid heating. As commented above, [https://news.ycombinator.com/item?id=27238108 https://news.ycombinator.com/item?id=27238108] this can then lead to damage if the saturation isn't detected.
If a Carrington event were detected in advance (we have about 12 hours warning with the satellites in the Lagrange point between earth and the sun, as the solar wind travels less than the speed of light), the prudent thing to do is turn off the grid, the second best option is to watch everything very carefully for the duration, and proactively turn off the circuits with overheating transformers.
Given the well known long term consequences of letting transformers saturate, I think prudent grid operators won't have a problem.