3 ms·
The problem is getting enough power to broadcast the sensor report. It means you have to run your sensors with a thimble of energy and store up remaining energ
by cogman10 6y ago
The problem is getting enough power to broadcast the sensor report. It means you have to run your sensors with a thimble of energy and store up remaining energy for a burst of reports (hope someone is listening :))
- lefrancais 6y agoThere is this company [https://uwinloc.com https://uwinloc.com] , I've been working for. However ,they are using 968MHz band to harvest energy, thus (lower freq = less loss due to distance). It works up to ~20m if the antenna are correctly "aligned".
- ThrowawayR2 6y agoProducts similar to that already exist, albeit not as low power as the device in the paper. For example, this passively powered UHF RFID tag has a moisture sensor built in: https://www.dipolerfid.com/RFID-Tags/Smartrac-Dogbone-Humidity-Sensor https://www.dipolerfid.com/RFID-Tags/Smartrac-Dogbone-Humidi...
- cptskippy 6y ago> a burst of reports That assumes the device needs to be running constantly collecting data. What if a circuit passively charges a capacitor that once full powers up the device just long enough to take a reading and transmit it? This wouldn't be viable for things like air monitors where the sensors need to warm up for minutes, but it seems like it would be ideal for temperature sensors which can be influenced by the waste heat of the device.
- tzs 6y agoIf you don't need much range (a couple feet, say), you can use ambient backscatter which doesn't need to store up energy for bursts. Here's a video about it from 2013 [1] showing some test devices. Here's an article about it [2]. A bit later they extended this to make it work with off-the-shelf WiFi devices, so you could have a battery-free device that can communicate to ordinary WiFi devices [3]. Still short range, but now you could make it so the reader is a commodity WiFi device like a smartphone, instead of a specialty device. Here are some other researchers who demonstrated a backscatter tag that diddled with Bluetooth Low Energy (BLE) instead of WiFi, and was correctly received by an iPad at over 9 m using the existing iOS Bluetooth stack with no modifications [4]. And here is a battery-fee phone that communicates with a powered base station [5]. It works up to 30 ft away. The phone uses energy from ambient RF and small photodiodes. [1] https://www.youtube.com/watch?v=gX9cbxLSOkE https://www.youtube.com/watch?v=gX9cbxLSOkE [2] https://www.washington.edu/news/2013/08/13/wireless-devices-go-battery-free-with-new-communication-technique/ https://www.washington.edu/news/2013/08/13/wireless-devices-... [3] https://iotwifi.cs.washington.edu/files/wifiBackscatter.pdf https://iotwifi.cs.washington.edu/files/wifiBackscatter.pdf [4] https://www.washington.edu/news/2017/07/05/first-battery-free-cell-phone-makes-calls-by-harvesting-ambient-power/ https://www.washington.edu/news/2017/07/05/first-battery-fre...
- londons_explore 6y ago> and small photodiodes. I bet the small photodiodes collect far more energy than the RF harvesting...