4 ms·

Switching between F and C should be difficult. This is something you set once and pretty much never change. If it’s easily changed, it’s easily changed by accid

Switching between F and C should be difficult. This is something you set once and pretty much never change. If it’s easily changed, it’s easily changed by accident. If I’m ever cooking a recipe that is written in imperial units, I will convert them all to metric prior to starting. (This includes turning nearly all measures into grams—including and especially cups and spoons.)

Broken_Hippo 6y ago
Why should it be difficult? You might not change it, but other folks do. My scale is easily changed. I pick it up, turn it over, and push a button. However, it is pretty difficult to change it by accident, and honestly, I just check the display before I weigh just to make sure. And honestly, do you think that folks are sitting down with pen and paper if they need to convert? Nope. Google will do this work for you. I'll also mention that it isn't worth it to weigh everything in the home kitchen. Small amounts - the ones you are using spoons for - are too light for the average kitchen scale, and the sensitive scales are expensive (and also have associations with dealing drugs, which turns some people off).
- somebodythere 6y ago
  I have a 0.1g precision scale from AWS which ran me about $25 dollars, and it has been indispensable both for the small ingredients and also for weighing stuff like frozen berries, where the gaps can make it hard to determine how much you actually have.
  - quickthrower2 6y ago
    AWS or Amazon?
    - jrockway 6y ago
      "American Weigh Scales" is the manufacturer. It has nothing to do with Amazon Web Services.
- simondotau 6y ago
  I have very cheap 0.1g precision scales and reasonably cheap 0.01g precision scales. Tablespoons (for example) are often equating to 10-25g which even the cheapest, nastiest 1g precision kitchen scales can handle with greater precision and repeatability than using an actual tablespoon It’s only when measuring half teaspoon stuff where I’ll either just use a teaspoon or pull out precision scales—it all depends how important it is to be accurate with an ingredient.
  - canadianfella 6y ago
    You have at at least 4 scales? Why?
  - 8note 6y ago
    Is density not a concern?
    - simondotau 6y ago
      Yes, which is precisely why I eschew cups and spoons for grams. There are standard conversions for most common ingredients, I’ll tend to use those for ingredients with the potential for high variation in density, like plain flour. Obviously, the main concern is with repeatability in baking. But for me the biggest benefit is being able to pour all ingredients directly into your bowl (sitting on scales) without dirtying up a pile of measuring cups and spoons.
    - URSpider94 6y ago
      To provide the correlate to @simondotau’s answer: in cooking, density hardly ever matters. All recipes should actually be solely in units of weight, never in units of volume. Professional chefs, and especially professional bakers, work solely in weights. Liquid measures by volume are mostly ok, since liquids vary hardly at all in density (for a given liquid). Solid measures by volume are a joke. It’s easy to be off by 10% or more, depending on how fluffy or packed down your ingredient is. When you’re baking a loaf of bread, this is the difference between a soggy mass and a dry pile of crumbs.
- ruined 6y ago
  It's a tool designed for professionals. Professionals operate with standards, so in a professional kitchen in America, you will never, ever need or want to read a temperature in Celsius. In the rest of the world, nobody will ever use Fahrenheit. Having a button that changes it with a single press is actually an impediment to working quickly, and only introduces uncertainty and anxiety about the tool. Measuring temperature isn't like measuring weight - seconds matter. A moment of confusion could be enough to ruin a process, and a failure to notice the change in settings could create a dangerous situation. Nobody wants a button to see the wrong number. Think of it like compile-time config. It's there, you can change it if you want, and everyone will have a preference, but if you need to change it often, you're not the target market. In the rare consumer case in which you may be using foreign measurements you can change it once at the beginning of the recipe.
  - 8note 6y ago
    I think if you could need to change it occasionally, you could easily be in situations where you change it frequently. Shadow kitchens that make recipes for multiple different restaurants could have measurements in both. To not have the button at all would make sense(compile time config), but if there are situations where you need to change it, those can come up as frequently as every time you use it
    - ruined 5y ago
      No. Every commercial kitchen complies with and is inspected for compliance with food handling regulations. Any recipe in commercial use is written specifically for the kitchen in which it is made. One might even consider them a complete vertical unit: if the recipe is designed as a chain or franchise standard, the kitchen standard is designed in tandem to match. You will not find a commercial kitchen in America using Celsius for anything. If you don't want professional tools don't buy them.
  - TwoBit 5y ago
    This idea that because a commercial kitchen doesn't mix F and C and thus nobody else should ever have to is ridiculous and is a form of gatekeeping. I download recipes and measurements are sometimes F, sometimes C. Sometimes ounces, sometimes grams. Sometimes cups, sometimes mls.
- ErikVandeWater 6y ago
  It shouldn't be difficult, but it should be foolproof. Someone not paying attention could mistakenly get a Fahrenheit reading expecting Celsius, and serve undercooked food to others.
denton-scratch 5y ago
Cups and spoons are volume measures; you can't trivially convert them to grammes. I can't use recipes that use cups and spoons. I don't own measuring spoons or measuring cups, and drinking cups and spoons from the cutlery drawer don't cut the mustard. In addition to a thermapen, I have an instant-read infra-red thermometer. I use this to check the temperature of my pizza oven, before launching a pizza - I launch at 450C, which is way too hot for any contact thermometer.
TwoBit 5y ago
> Switching between F and C should be difficult. This is something you set once and pretty much never change. No, because my own experience says otherwise. And this idea of accidental changing is hogwash, again because I've used this for years. Experience is worth a thousand opinions.

Broken_Hippo 6y ago

Why should it be difficult? You might not change it, but other folks do. My scale is easily changed. I pick it up, turn it over, and push a button. However, it is pretty difficult to change it by accident, and honestly, I just check the display before I weigh just to make sure. And honestly, do you think that folks are sitting down with pen and paper if they need to convert? Nope. Google will do this work for you. I'll also mention that it isn't worth it to weigh everything in the home kitchen. Small amounts - the ones you are using spoons for - are too light for the average kitchen scale, and the sensitive scales are expensive (and also have associations with dealing drugs, which turns some people off).

somebodythere 6y ago
I have a 0.1g precision scale from AWS which ran me about $25 dollars, and it has been indispensable both for the small ingredients and also for weighing stuff like frozen berries, where the gaps can make it hard to determine how much you actually have.
- quickthrower2 6y ago
  AWS or Amazon?
  - jrockway 6y ago
    "American Weigh Scales" is the manufacturer. It has nothing to do with Amazon Web Services.
simondotau 6y ago
I have very cheap 0.1g precision scales and reasonably cheap 0.01g precision scales. Tablespoons (for example) are often equating to 10-25g which even the cheapest, nastiest 1g precision kitchen scales can handle with greater precision and repeatability than using an actual tablespoon It’s only when measuring half teaspoon stuff where I’ll either just use a teaspoon or pull out precision scales—it all depends how important it is to be accurate with an ingredient.
- canadianfella 6y ago
  You have at at least 4 scales? Why?
- 8note 6y ago
  Is density not a concern?
  - simondotau 6y ago
    Yes, which is precisely why I eschew cups and spoons for grams. There are standard conversions for most common ingredients, I’ll tend to use those for ingredients with the potential for high variation in density, like plain flour. Obviously, the main concern is with repeatability in baking. But for me the biggest benefit is being able to pour all ingredients directly into your bowl (sitting on scales) without dirtying up a pile of measuring cups and spoons.
  - URSpider94 6y ago
    To provide the correlate to @simondotau’s answer: in cooking, density hardly ever matters. All recipes should actually be solely in units of weight, never in units of volume. Professional chefs, and especially professional bakers, work solely in weights. Liquid measures by volume are mostly ok, since liquids vary hardly at all in density (for a given liquid). Solid measures by volume are a joke. It’s easy to be off by 10% or more, depending on how fluffy or packed down your ingredient is. When you’re baking a loaf of bread, this is the difference between a soggy mass and a dry pile of crumbs.
ruined 6y ago
It's a tool designed for professionals. Professionals operate with standards, so in a professional kitchen in America, you will never, ever need or want to read a temperature in Celsius. In the rest of the world, nobody will ever use Fahrenheit. Having a button that changes it with a single press is actually an impediment to working quickly, and only introduces uncertainty and anxiety about the tool. Measuring temperature isn't like measuring weight - seconds matter. A moment of confusion could be enough to ruin a process, and a failure to notice the change in settings could create a dangerous situation. Nobody wants a button to see the wrong number. Think of it like compile-time config. It's there, you can change it if you want, and everyone will have a preference, but if you need to change it often, you're not the target market. In the rare consumer case in which you may be using foreign measurements you can change it once at the beginning of the recipe.
- 8note 6y ago
  I think if you could need to change it occasionally, you could easily be in situations where you change it frequently. Shadow kitchens that make recipes for multiple different restaurants could have measurements in both. To not have the button at all would make sense(compile time config), but if there are situations where you need to change it, those can come up as frequently as every time you use it
  - ruined 5y ago
    No. Every commercial kitchen complies with and is inspected for compliance with food handling regulations. Any recipe in commercial use is written specifically for the kitchen in which it is made. One might even consider them a complete vertical unit: if the recipe is designed as a chain or franchise standard, the kitchen standard is designed in tandem to match. You will not find a commercial kitchen in America using Celsius for anything. If you don't want professional tools don't buy them.
- TwoBit 5y ago
  This idea that because a commercial kitchen doesn't mix F and C and thus nobody else should ever have to is ridiculous and is a form of gatekeeping. I download recipes and measurements are sometimes F, sometimes C. Sometimes ounces, sometimes grams. Sometimes cups, sometimes mls.
ErikVandeWater 6y ago
It shouldn't be difficult, but it should be foolproof. Someone not paying attention could mistakenly get a Fahrenheit reading expecting Celsius, and serve undercooked food to others.

denton-scratch 5y ago

Cups and spoons are volume measures; you can't trivially convert them to grammes. I can't use recipes that use cups and spoons. I don't own measuring spoons or measuring cups, and drinking cups and spoons from the cutlery drawer don't cut the mustard. In addition to a thermapen, I have an instant-read infra-red thermometer. I use this to check the temperature of my pizza oven, before launching a pizza - I launch at 450C, which is way too hot for any contact thermometer.

TwoBit 5y ago

> Switching between F and C should be difficult. This is something you set once and pretty much never change. No, because my own experience says otherwise. And this idea of accidental changing is hogwash, again because I've used this for years. Experience is worth a thousand opinions.