2 ms·
I made gears for 5 years, and did IT and electronics before that. The problem with making a gear (qty 1) is the setup. If you don't have 5 axis CNC and the righ
by mikewarot 6y ago
I made gears for 5 years, and did IT and electronics before that. The problem with making a gear (qty 1) is the setup. If you don't have 5 axis CNC and the right set of software and cutting tools, you're stuck with old machines that require a huge inventory of cutters, and setup times just for gear cutting in the order of half a day's work... for a single part.
Once you cut the part, then you send it off to hardening, get it back and then grind it to final dimensions, for a really, really good gear.
I want to make it possible for a job shop, or someone in their garage, to be able to turn out any given spur, helical, or bevel gear. I believe the low cost CNC controllers and open source software can be leveraged to make a machine to do this for less than $1000.
Hardening is outside the scope of the project, but grinding is just cutting by different means, and should also be possible.