3 ms·

> Of course the R&D makes upt the majority of the price. When is that ever not the case? Like, pretty much every other product that wasn't an entirely new conc

by Aachen 6y ago

> Of course the R&D makes upt the majority of the price. When is that ever not the case? Like, pretty much every other product that wasn't an entirely new concept in the last few years? Looking around me, I think the thing with the highest R&D price component is probably the chips in computers (desktop, laptop, smartphones), everything else is just mass production and low markup with hardly any research recuperation in the price (keyboard, lamp, paper, desk, floor, beanbag, fridge, IR thermometer, picture frames, a spoon, a computer display...). Unless you meant "when is that not the case for astro trackers", I don't get what you meant because it's rather exceptional to still be paying off R&D if you're buying regular mass-produced consumer products. > This is something that has been thought about, Obviously, but if it's open source (with a free, commercial-use license and no big call for donations other than a coffee) then apparently recuperation that design time is not a goal, they're actively giving it away for free and encouraging people to make it themselves. That suggested to me that the price must be for an expensive component or two. Or perhaps the printing time, but since it's mostly unattended and filament is cheap, I didn't expect it to be that. And the tracking calculations have been long done by people decades ago, so it's just buying parts and putting them together, where the "putting together" part is done by the customer since it's a kit. So yeah I expected the price to be mostly an expensive precise motor or something.

dylan604 6y ago
Great, Apple's new M1 based systems now exist on the market. Go make one for me for less than what Apple sells theirs. Should be easy according you since someone else is already doing it. R&D is everything in making of something. Just because someone else made it doesn't mean you get to start exactly where they left off (except in cases of open source where you get their literal plans). Even in wood working or any shop type of work, you often spend more time setting up things like jigs or other custom tooling than it takes to do the actual work. Is that supposed to be a sunk cost to the builder? No, it is part of how the builder arrives at the price of the final thing being built.
- sink 6y ago
  I'm not sure why you're so hostile to the GP. Their questions are sincere. Your comparison to the M1 is not appropriate, and you're not actually paying attention to what they wrote. They wrote that they are surprised that R&D makes up the majority of the cost, since this is an open source project. This is a fairly non-obvious feature of open source company business models. They give away the product, and its designs, for free, and solicit community collaboration. But it's usually complex or cumbersome to operationalize or build, so they then sell a set of services or pre-builds around it. Datastax and Confluent are two examples of this in the OSS domain. Woodworkers don't market their plans as open source, put them on Github, and accept pull requests. Don't create arrogant, sarcastic responses to sincere questions. It devalues this forum, and it's a bad look.
  - dylan604 6y ago
    >They wrote that they are surprised that R&D makes up the majority of the cost, I am as equally as surprised by their surprise about how much R&D is involved in making a "simple" lamp. Someone had to draw the plans so that the metal/plastic could be formed/shaped into the lamp. The parts had to be researched on what could suffice and be safe. Some person didn't just go "i want to make a lamp" and a lamp was created (unless they had Aladdin's lamp first). Research can be as simple as internet searching on parts, but that is still research even if people with PhDs and white lab coats were not involved. The design is still necessary in getting the lamp to a shape that is aesthetically pleasing enough for someone to want to buy it. >Woodworkers don't market their plans as open source, put them on Github, and accept pull requests. That's not true in the spirit to the point you are making. There are plenty of websites where wood workers offer their plans/drawings/instructions, and then allow comments where people that followed their plans made modifications. So yes, they don't necessarily use Git and PRs, but the concept is there nonetheless. Same with cooking/baking/etc. > I'm not sure why you're so hostile to the GP. >Don't create arrogant, sarcastic responses to sincere questions. It devalues this forum, and it's a bad look. You're reading into the comment an emotion that did not exist when the message was sent. If you read hostility, then that's no what I was trying to infer.
    - 6y ago
oivey 6y ago
Just do it all yourself then? It doesn’t seem unreasonable that the creators of this want to make a little money off of something that almost certainly took a lot of their time. If the markup is too high you’re welcome to assemble your own. R&D cost is built in to everything you buy, otherwise the companies that make this stuff wouldn’t be profitable. The amount of per unit R&D markup for, say, a thermometer just isn’t as high due to its relatively low complexity and huge number of units sold. This thing is niche and not going to sell that many units.

by Aachen 6y ago

dylan604 6y ago

Great, Apple's new M1 based systems now exist on the market. Go make one for me for less than what Apple sells theirs. Should be easy according you since someone else is already doing it. R&D is everything in making of something. Just because someone else made it doesn't mean you get to start exactly where they left off (except in cases of open source where you get their literal plans). Even in wood working or any shop type of work, you often spend more time setting up things like jigs or other custom tooling than it takes to do the actual work. Is that supposed to be a sunk cost to the builder? No, it is part of how the builder arrives at the price of the final thing being built.

sink 6y ago
I'm not sure why you're so hostile to the GP. Their questions are sincere. Your comparison to the M1 is not appropriate, and you're not actually paying attention to what they wrote. They wrote that they are surprised that R&D makes up the majority of the cost, since this is an open source project. This is a fairly non-obvious feature of open source company business models. They give away the product, and its designs, for free, and solicit community collaboration. But it's usually complex or cumbersome to operationalize or build, so they then sell a set of services or pre-builds around it. Datastax and Confluent are two examples of this in the OSS domain. Woodworkers don't market their plans as open source, put them on Github, and accept pull requests. Don't create arrogant, sarcastic responses to sincere questions. It devalues this forum, and it's a bad look.
- dylan604 6y ago
  >They wrote that they are surprised that R&D makes up the majority of the cost, I am as equally as surprised by their surprise about how much R&D is involved in making a "simple" lamp. Someone had to draw the plans so that the metal/plastic could be formed/shaped into the lamp. The parts had to be researched on what could suffice and be safe. Some person didn't just go "i want to make a lamp" and a lamp was created (unless they had Aladdin's lamp first). Research can be as simple as internet searching on parts, but that is still research even if people with PhDs and white lab coats were not involved. The design is still necessary in getting the lamp to a shape that is aesthetically pleasing enough for someone to want to buy it. >Woodworkers don't market their plans as open source, put them on Github, and accept pull requests. That's not true in the spirit to the point you are making. There are plenty of websites where wood workers offer their plans/drawings/instructions, and then allow comments where people that followed their plans made modifications. So yes, they don't necessarily use Git and PRs, but the concept is there nonetheless. Same with cooking/baking/etc. > I'm not sure why you're so hostile to the GP. >Don't create arrogant, sarcastic responses to sincere questions. It devalues this forum, and it's a bad look. You're reading into the comment an emotion that did not exist when the message was sent. If you read hostility, then that's no what I was trying to infer.
  - 6y ago

oivey 6y ago

Just do it all yourself then? It doesn’t seem unreasonable that the creators of this want to make a little money off of something that almost certainly took a lot of their time. If the markup is too high you’re welcome to assemble your own. R&D cost is built in to everything you buy, otherwise the companies that make this stuff wouldn’t be profitable. The amount of per unit R&D markup for, say, a thermometer just isn’t as high due to its relatively low complexity and huge number of units sold. This thing is niche and not going to sell that many units.