3 ms·
> the capacitors can easily be holding a lethal charge even though the device is unplugged That used to be true when every power supply had a couple electrolyt
by bsder 6y ago
> the capacitors can easily be holding a lethal charge even though the device is unplugged
That used to be true when every power supply had a couple electrolytics as big as your fist. Only audio and guitar amplifiers are designed like this nowadays.
At this point, I don't think I've seen a power supply in years that could really deliver even a slight jolt after turnoff--max is about 20uF of electrolytic cap nowadays. For a 20uF cap at 100V, it can deliver 4mA for only about half a second--that is probably just barely capable of doing something to your heart if applied directly.
The bigger danger is you accidentally working on something still energized and you don't realize it.
- throwaway0a5e 6y agoNot to mention that many power supplies include circuitry to discharge the capacitors whenever they are not in use (hence why many old devices with hard power switches would still consume electricity when plugged in). Regardless, the myth will almost certainly persist so long as making a low effort comment about safety is behavior people reward with internet virtue points.
- lmilcin 6y agoThat is bad advice. If in doubt, stay away. SMPS topologies can use capacitors on high voltage side rather than on low voltage side (like old linear supplies did). If you don't know what is the topology and how it failed you should not assume it is safe to put your greasy noob fingers in it.
- bsder 6y agoYou will note that my calculations assume that the caps are charged to the high-side voltages ... And I'm really, really struggling to come up with a switch-mode power supply topology design that has more than 100uF anywhere. I stand by my statement. The biggest problem when dealing with power supplies nowadays is getting the shit shocked out of you when they're plugged in--especially if you don't realize it.