4 ms·
There are a lot of practicality/implementation concerns to paint other than what color it is. Just as many if not more than there are for battery technologies.
by kube-system 6y ago
There are a lot of practicality/implementation concerns to paint other than what color it is. Just as many if not more than there are for battery technologies.
Does the paint stick to the surface you want to paint, how is it applied, what is the coverage, is it durable, does it repel contaminants, can it withstand the environmental conditions, is it chemically compatible with the surface, it is chemically a concern for the other items/humans/animals that may come in contact with, can it be produced at scale, does it (and it's vehicle for application) meet regulatory standards? etc...
- blacksqr 6y agoThey used standard acrylic paint manufacture techniques, just substituting barium sulfate for the usually-used white pigment titanium dioxide. So most such questions should be answered simply by looking at previous experience with existing white acrylic paint.
- Tempest1981 6y agoOther factors include how it ages, w.r.t. thermal emittance (emissivity) and solar reflectance (SRI). See the "3 years" columns here: https://coolroofs.org/directory https://coolroofs.org/directory Many products drop by several % after a few years.
- clairity 6y agoone thing i’ve learned from doing little home improvement projects over the past few years is that paint is a 2-part product, primer and topcoat, and neither should be skipped if you want good results. generally speaking, primer sticks and seals while topcoat colors and protects. this isn’t made obvious in any way to the novice, and big box store workers seem as ignorant about it as anyone.
- mauvehaus 6y agoDepending on the application, the primer coats can fulfill a couple other requirements as well: If you want a really smooth topcoat, you usually want to sand past what you can reasonably/economically/effectively do on the substrate. Some primers are formulated to sand nicely to a powder (as opposed to balling up in clumps on the paper). You'll see this spraying higher quality paint grade work. You have to have a decent surface before you prime, but the primer can really smooth it out for the topcoat. If you're finishing pine with knots in it, you'll want a primer that will seal the knots, otherwise the pitch will eventually bleed through and discolor the topcoat. Shellac excels at this. Shellac is also outstanding as a sanding sealer. You can use that in a couple of ways: to fill the pores in the wood so they don't get full of sanding dust (which can be key if you have inlay of strongly contrasting woods), or to stiffen the fibers of softer woods so you can get a better/smoother sanded surface for the next steps in the finishing schedule. Shellac is also often used as a barrier coat between otherwise incompatible finishes or when you have a relatively fragile stain layer. If you're putting an oil based finish over an oil based stain, you run the risk of picking up the stain as you apply the topcoat, especially if you're brushing or wiping the topcoat. Because the solvent in shellac is alcohol, you can pretty freely brush it over oil or water based stains without risking a disaster. And yes, I do use primers other than shellac from time to time if I have a specific need, but dewaxed shellac is compatible with basically everything, so I always have a can around. N.B. I'm not a professional finisher. Don't take my word on any of this; test your prep and finishing schedule on scrap!
- clairity 6y ago> “If you're finishing pine with knots in it, you'll want a primer that will seal the knots, otherwise the pitch will eventually bleed through and discolor the topcoat. Shellac excels at this.” yes, i learned this the hard way, albeit on a simple set of wall shelves as cat stairs that i can easily fix eventually with shellac and another topcoat (when i get around to it).