2 ms·
So when you work with analog electronics, you learn that voltage is your friend. Playing with +/- 12V (a 24V range) for "analog logic" is innately cleaner than
by dragontamer 6y ago
So when you work with analog electronics, you learn that voltage is your friend. Playing with +/- 12V (a 24V range) for "analog logic" is innately cleaner than playing with 0V to 5V (5V range).
Lets say you make a design that has +/- 1V error. On the 5V circuit, that's 20% error. But on the +/-12V circuit, it is only 4.1% error. (Going much better than 5% or 1% error is nonsensical. Most resistors you'll buy are 5% error, and capacitors are maybe +/- 20% error). So you can see, +/-1V error is acceptable on +/-12V circuits, but maybe unacceptable on 5V circuits.
If precision is important, there are 1% or 0.1% resistors available, as well as matched-resistors (which have say 1% error, but all the resistors have the same degree of error, so your "proportions" remain consistent. You can manually-match resistors together with an accurate ohm-meter as well)
As such, +/- 12V is simply easier to make "precise" electronics on. Of course, the downside is that you've got leakage all over the place (more voltage means more power-draw)
---------
But now its 2021. Most parts, even extremely cheap "Jellybean" parts like the LM358, have low errors and low-bias. And USB's popularity as a 5V delivery mechanism has grown, everyone has a USB plug somewhere to use as the basis of electricity experiments.
So while electronic engineers way back played with +/-12V, today the assumption is that you play with 0V to 5V.