6 ms·
It did predate it by over 5 years. If you're talking about tech features the 30-pin supported (at various points) Firewire, USB, play controls, line-level analo
by pfranz 6y ago
It did predate it by over 5 years. If you're talking about tech features the 30-pin supported (at various points) Firewire, USB, play controls, line-level analog audio and video--for example there was a 30-pin to VGA. AFAIK USB isn't capable of almost any of these things. I believe things like USB audio came later and the 30-pin cable supported that, too.
Even though the connector is much wider I found it way more reliable and easier to plug in without looking at the bottom of the device. It also seems way sturdier when jamming your player into a speaker dock. You mention "well-made" cables. Micro USB is now 14 years old and I don't know of a reliable brand (maybe Anker?). I still constantly throw out cables not knowing if they're broken, not rated for use, or what.
I love standards. I don't know why it took decades to come up with a reversible connector. I've been waiting for USB-C to take off for awhile. Sadly, cable compatibility seems to be a mess (between power, speed, thunderbolt compatibility, etc).
- ldrndll 6y agoI absolutely loathe micro USB. I am constantly having to throw away cables that are a few months old because they no longer reliably charge my devices (PS4 controllers, Fire tablets, Bose headphones), and that's with me buying the most reliable cables I can find (Anker). Micro USB really is terrible...
- turbinerneiter 6y agoI never ever had a micro usb cable fail. I often had problems with USB C in my previous phone on the phone side. Apple cables fray almost immediately.
- ceejayoz 6y agoMy issues have never been the Micro USB cables, but the ports. They seem to often not be solidly secured into the device. (Amazon's Kindles' ports are pretty rock solid, to their credit.)
- catlifeonmars 6y agoIIRC the major innovation for USB-C is to put the spring loaded component into the cable rather than the device. This is brilliant, since springs wear out over time and it’s much easier to replace a cable than a device in most (all?) situations.
- majewsky 6y agoMicro-USB-A also has the movable part in the cable (the two little teeth on the flat side). You might be thinking of Mini-USB-A.
- catlifeonmars 6y agoYes I was wrong. I assumed that micro usb A and B did not spring components in the cable. It’s only the pre-micro usb cables lack this improvement.
- danaris 6y agoThe problem with the ports isn't (in in my experience) with spring-loaded components wearing out: rather, like ceejayoz said, I've seen a number of cases where the port just...moves around inside the device, so that you can't plug the cable in properly. Either it gets offset, so that the port is simply inaccessible through the slot in the case, or pushing in on it just makes the port itself push further into the case. (In that case, one can generally force it in a few times before things start to really break within the case.) I know of no specific reason why this should be more common with micro-USB than with other connectors, but I've only seen it happen with micro-USB in person.
- XorNot 6y agoIt's more likely the solder is cracking off the PCB. Jiggling the port around forces it back into good contact and it'll sporadically work. The real problem is we don't bolt the ports to the chassis in most cases, we just put them on the PCB with little bracing them in the direction of applied force.
- Larrikin 6y agoApple cables used to be the worst cables when it comes to fraying. I had never had a cable fray except apple cables, but I also haven't had an apple cable fray in a few years now. It seems like whatever terrible way they used to make the cables has been fixed