3 ms·
The problem is engineers look at this like engineers and make assumptions and decisions based on the objectives given and their toolkit. When you hire an ASHRAE
by Spooky23 6y ago
The problem is engineers look at this like engineers and make assumptions and decisions based on the objectives given and their toolkit. When you hire an ASHRAE certified engineer, he’s going to be all about HVAC, based on whatever the architect produced.
Usually that means a focus on less energy usage. That frequently doesn’t align with lower cost or optimal solution. For example, buying a 95% efficient boiler for my home would cost significantly more over its useful life when you account for capital costs, retrofit for exhaust, and operational/maintenance expense (efficient units require annual inspection and maintenance via service contract). 80% results in more fuel consumption, but significant lower TCO.
In commercial or larger buildings, the obsession with sealing windows introduces lots of waste. The cost of more heating efficiency is more A/C days.
Also, the practices around construction have changed, driven partially by “efficiency” to build boxes with no passive ventilation. If you go into a well-designed circa 1910 building like a school, office and other inhabited spaces had higher ceilings, higher windows, etc that permitted passive ventilation. My house in upstate NY is like this... we use air conditioning for <20 days a year, and our extra heating costs are negligible. My neighbor’s circa 1995 house is a modern series of interconnected boxes — they have to run AC from June-September because there is no effective ventilation.
- leetcrew 6y agoI know you only said "partially by efficiency", but the other part is pretty important. another goal of sealing the building is to align the moisture and thermal barriers with each other. this is important, because this is how you control humidity inside the envelope. in theory, this makes it much less likely that you get mold, rot, etc. if you're going to heat/cool your house at all, you really don't want heated inside air getting cooled down in the winter or warm outside air getting cooled in the summer. if you have significant passive ventilation, you don't really have a moisture or thermal barrier.
- Spooky23 6y agoAgreed — I was trying to capture a lot in a small space without being hand-wavy. (Not sure if I succeeded) My big “beef” is that assumptions that require active, intelligent building management and maintenance have their own risks. These are hard to quantify and thus discounted. Case in point: I worked for a decade in a building with professional management and all sorts of efficiency programs where chronic issues like a leaking roof were ignored for 30 years. In theory, the HVAC did a great job of moisture control. In reality, there was 3 feet of water on the roof. (Water wins) Point being, budgets drive suboptimal behavior. In my personal case, my house was designed with features that permit user-controlled airflow and thermal flow. It has modern windows, enhanced attic ventilation, etc that improve performance. Many buildings are not and are dependent on active ventilation to be livable or mold-free.