2 ms·
I'm going to agree with ehutch on this. Don't try to cover a multi story house with a single AP. Would you attempt to cover the house with one music radio? No,
by pixl97 6y ago
I'm going to agree with ehutch on this. Don't try to cover a multi story house with a single AP. Would you attempt to cover the house with one music radio? No, it would be way to loud near the stereo and way too quite far away. Also you spill signal into neighbour's location and blast excess noise into the spectrum.
3 APs on a lower setting would give you much better performance.
- Waterluvian 6y agoI appreciate yours and ehutch's feedback. 1 AP is a hard requirement, sadly. I have 6 locations in my house I can plug in my cable modem and for now there shall be no hole drilling and Ethernet cable running. My current setup works, but I'm surprised I cannot just centrally locate 1 Wifi AP. We did that when I was younger in a far larger house. But I guess back then wifi was far slower and more robust?
- boatsie 6y agoThe problem is 5ghz has much better bandwidth but less range than 2.4ghz. Also there is more interference these days with everyone having routers.
- mizzack 6y agoYou can still run a mesh without a wired backhaul. It's just not as fast/reliable. Also, 5.8GHz does not penetrate walls as well as the older 2.4GHz standards.
- pixl97 6y agoYou can't really compare things to the past for a lot of reasons. 1. In the past you were probably the only person with wifi in a mile. Now you have countless units attempting to talk in any given place on a very limited spectrum. 2. 5ghz is fast but walls and objects kill your speed quick. 3. Turning down your current 2.4ghz to wireless B speeds will increase your reliability in environments with few neighbours. Imagine a 10mbit network hub. Worked ok back in the day. Now try to increase its speed to 1gbit and add lots of uses. You wont get much done, everything gets corrupted and you retransmit a lot.