6 ms·
> Is there going to be a soldering kit version of this? > No. (But on the other hand, "Anything is a soldering kit if you're brave enough!") No kidding - hand
by musicale 6y ago
> Is there going to be a soldering kit version of this?
> No. (But on the other hand, "Anything is a soldering kit if you're brave enough!")
No kidding - hand-soldering a few surface-mount components is hard enough, let alone 10,000 of them! Though I suppose you'd get very good at it by the time you were done. Maybe 20 components per day for 500 days or something.
- andrewcchen 6y agoThe trick to doing smd soldering is reflow. On all budget all you need is a hot air gun, if you put solder and flux on the pads manually before placing the components. With a stencil and solder paste you can save the time tinning the pads, and placing a component every few seconds is quite possible. So if you work really hard and quite possibly break your back you can assemble this board in a day :)
- auxym 6y agoIf you're working with stencil and paste, my understanding is that paste only has a few hours of working time once it's applied, so you have to assemble it in the day.
- AnthonBerg 6y agoAs it turns out, surface mount soldering is actually easier than through-hole! The difference is a matter of technique, a simple but perhaps not immediately obvious one. And some stuff to help with it. Liquid solder flux is key. The core of the method: Melt a small blob of tin onto a solder pad. Solder flux is applied to tin blob. Hold component to blob with tweezers. Melt blob with iron. Component will now stay put. Apply solder to the other pad. Done. This makes use of the solder's surface tension and adherence properties; The solder only wants to stick to hot metal surfaces, and surface tension will actually align the component on the pad. Very clever! The step that adds flux is there to allow us to re-melt the solder, have it flow well, and crystallize correctly when it cools (so no cold joints). Chips are soldered with a logical extension of the technique that further employs the solder's preferences for sticking to this and flowing like that :) After having been taught this, I now find through-hole much more of a hassle. It's nice to be free of the hole-poking and board-flipping and leg-snipping. And it's nice to be able to avoid the increased circuit noise that the superfluous metal brings (the legs are effectively antennae!). Here is where I learned: https://store.curiousinventor.com/guides/Surface_Mount_Soldering/101/ https://store.curiousinventor.com/guides/Surface_Mount_Solde...