2 ms·
Personally I prefer the Z80 --- it has the advantage of many more registers, addressing modes more suited to HLLs, and a stack that is not limited to a fixed 25
by userbinator 6y ago
Personally I prefer the Z80 --- it has the advantage of many more registers, addressing modes more suited to HLLs, and a stack that is not limited to a fixed 256-byte portion of the address space. Of course it also needs more than twice the number of transistors and thus die area, which may be why the 6502 is still so widespread.
- cmrdporcupine 6y agoZ80 instruction set is nicer, but the Z80 was also half the speed per clock cycle, less responsive to interrupts, and more expensive. Hence why the 6502 got slapped in a lot more home computers and the like. Actually the 6502 designers really intended it more for control systems / embedded. The 6809 is the best of the bunch tho.
- dboreham 6y agoAlthough Z80 has lower IPC, it had a roughly 2x clock speed so performance was about the same Z80 slightly faster for most applications. It would be rare however for there to be a direct "bake off" between the two CPUs -- any given design organization was either an 8080/Z80 shop or a 6800/6502/6809 shop. There weren't sufficiently great differences in price/performance between the two to make it worthwhile changing.
- zimpenfish 6y agoYou could get a BBC Model B (6502 2MHz), add the 3MHz 6502 board, add the 6MHz Z80B board, and do a "bake off" between all three (obvs. scaling for clock speed.) Then add the 8MHz ARM1 board and watch it smoke the rest into dust, I suppose.