3 ms·
It is a good idea, but there are lots of good ideas when it comes to cars. Do you ever start your car when parked on an incline? That can play havoc with oil
by sandworm101 6y ago
It is a good idea, but there are lots of good ideas when it comes to cars. Do you ever start your car when parked on an incline? That can play havoc with oil delivery but we all do it. Park a car in the cold with a not-full gas tank? That isn't recommended either.
Cold-starting engines 30 years ago was a big problem. They had lots of different metals that would flex against each other. Modern engines are built to tighter tolerances and that means metals that expand/contract at more similar rates. And our oils do not thicken as easily thanks to improved chemistry. A cold start really isn't going to destroy your engine. It will still probably outlive the rest of your car.
- throwaway0a5e 6y ago30yr ago was 1991. Pretty much anything with fuel injection (i.e. basically everything in 1991) will start just fine at low temperatures. The one OEM who's processes I have knowledge of with was doing their testing down to -40F in the late 1980s (which coincidentally is the temperature at which their electronics system starts throwing codes for misbehaving temperature sensors).
- to11mtm 6y agoPartially agree, but... - Some of the manufacturers at times have moved back towards Iron-Block/Aluminum-head designs (rather than all aluminum.) Thankfully yes modern gasket technology and metallurgy has improved but there is still extra wear and tear as a result. - Depending on the way the ECU is set up, there may be other advantages to pre-warming the block. As an example, my WRX sometimes gets -really- cranky starting in cold temps. But it's not the start I'm worried about. - Below ~25F, the fluid in the clutch gets to the point where I can sometimes pull my leg off the clutch and wait at least a half-second before the pedal 'thunks' up. An engine block heater would probably help with that a bit. - The way the ECU is programmed, there is a -long- delay from when the car switches from open loop (just working off a MAP or MAF sensor) to closed loop (looking at the O2 sensor). In cold enough weather, If the temp gauge doesn't reach a certain point before I hit the highway, it -never- hits closed loop and my mileage is absolute trash. Not every car is set up like this, but more than you think. It's an emissions thing.
- sandworm101 6y agoMost of your clutch's working fluid is nowhere near any block heater. It is in your clutch master cylinder right above your clutch pedal. It is essentially inside the cabin with you rather than under the hood with the engine. You might have a fluid reservoir under the hood but, warm or cold, that fluid isn't being used unless you have a leak. As for running temperatures, the standard trick is to reduce airflow across the radiator. Trucks put on "bras" or you can rig up something made of carboard in front of the radiator. Always cardboard because it is soft enough not to damage anything if it gets loose.