3 ms·
I wonder about the choice of 3.5mm TRS stereo jack for the inputs. Ordinarily this would mean you need to buy prefabricated 3.5mm TRS cables and cut one end of
by walrus01 6y ago
I wonder about the choice of 3.5mm TRS stereo jack for the inputs.
Ordinarily this would mean you need to buy prefabricated 3.5mm TRS cables and cut one end off to wire them up to the CT, because it's difficult or annoying to terminate your own 3.5mm TRS plug connector.
Why not some other connector choice? Maybe RJ11, or one of the typical 'green' two conductor terminal blocks socket/plug combos with latches you can get from Digikey or Mouser?
- VectorLock 6y agoAll these current sense coils come with 3.5mm so I think thats why they use them.
- amluto 6y agoHigh quality CTs from reputable brands come with wire leads. Here’s a nice, inexpensive CT, UL listed: https://www.magnelab.com/products/uct-0350-050-ct/ https://www.magnelab.com/products/uct-0350-050-ct/ This style also has an integrated burden resistor, which makes it far safer than a plain current transformer.
- ssl-3 6y agoI haven't had tools to do 6P4C for over a decade and almost never used them anyway, but my soldering iron works great for TRS. I'm not displeased with this connector choice. FYI, there are 3.5mm TRS adapters out there that have green screw terminals if that's your thing. They're very inexpensive. But connecting my own current transformers isn't the intent here, I don't think. I think the intent is to have plug-and-play kits that are hard to screw up. And the prices for their own CTs seem fine to me.