3 ms·
Drag required to make lift is only a subset of total drag. A car for example doesn’t need to produce lift, but it still displaces air which causes drag. The s
by Retric 6y ago
Drag required to make lift is only a subset of total drag.
A car for example doesn’t need to produce lift, but it still displaces air which causes drag. The same is true of an aircrafts fuselage, which is generally not used to generate lift but still increases total drag. https://en.wikipedia.org/wiki/Parasitic_drag https://en.wikipedia.org/wiki/Parasitic_drag
Also, an aircraft is generally designed so that at cruse speed and altitude the wing incidence angle provides appropriate lift. https://en.wikipedia.org/wiki/Angle_of_incidence_(aerodynamics) https://en.wikipedia.org/wiki/Angle_of_incidence_(aerodynami.... Which means at optimal curse distance the cabin would almost perfectly level independent of optimal cruse speed or altitude.
- mliben 6y agoYes, the range-optimal speed is where the parasitic drag is equal to the lift-induced drag. If you go through the analysis, the air density drops out of the range equation if you assume are operating at the range-optimal speed (which is higher at lower air densities).
- Retric 6y agoThat’s only relevant up until you approach the speed of sound. Passenger aircraft are designed to stay subsonic for a host of very good reasons.
- mliben 6y agoDefinitely, for sure. Like I said in the other thread, supersonic is a whole other thing, and I don't think anyone is trying to electrify anything supersonic any time soon :)
- gnramires 6y ago> the range-optimal speed is where the parasitic drag is equal to the lift-induced drag Not quite true -- range-optimal speed is where the sum of those terms is minimal. With some assumptions, this is where the derivative is 0, dDrag/dv = 0, and since derivative is linear, this means: the range-optimal speed is where the (infinitesimal) increase of parasitic drag (with speed) is equal to the decrease of lift-induced drag (in other words, opposite derivatives).
- mliben 6y agoUsing the simple drag polar approach, D = A*v^2 + B/v^2 (D is total drag, first term is parasitic drag, second term is lift-induced drag) dD/dv = 0 where v = (B/A)^(1/4) Plug in v = (B/A)^(1/4) D = sqrt(AB) + sqrt(AB), aka dD/dv = 0 exactly when parasitic drag is equal to the lift-induced drag
- gnramires 6y agoI stand happily corrected :)