4 ms·
PSA: scratched and scuffed DVDs can almost always be restored with a few seconds of buffing on a machine ( or a long time by hand). The reflective layers are i
by aidenn0 6y ago
PSA: scratched and scuffed DVDs can almost always be restored with a few seconds of buffing on a machine ( or a long time by hand).
The reflective layers are in the middle of the medium, so unless it's a very deep gouge, it's probably fine.
I've also noticed that laptop (and by extension, slim usb units) DVD and Blu-ray drives are much less capable of reading marginal media. I had one disc completely unreadable in a slim drive that played just fine in my set top, and also read out with a modest number of retries on my desktop.
- ddingus 6y agoSame with CD. I had a SONY car changer. It would play literally anything. Seriously, I found a Bare Naked Ladies CD on the ground. Scuffed to a point of doom. For grins, I put it in the SONY, and it took a bit longer to buffer up, but just worked! That same disc would not play in any other device I had. I get the feeling the more robust error correction was not implemented on most devices.
- aidenn0 6y agoFor CDs the metal is right under the label, so if you have a gouge on the label side, it's probably DOA.
- ddingus 6y agoDepends on how robust the device error correction is. That Sony would play very badly scuffed discs. Both side scuffed. It did so with remarkably few skips. No pops. Just about everything else I have owned would either refuse that media entirely, or play a mess.
- WalterBright 6y agoI've tried various polishing compounds on DVDs to no avail. But I've also found that trying it in various players means maybe one of them will play it. The only problem I have with VHS is I have to clean the heads now and then with alcohol.
- aidenn0 6y agoInteresting. I don't have a buffing wheel, but my friend does and he buffed a few for me. I don't remember what compound he used, but I think it was for buffing clearcoat on cars.
- deleted 6y ago[deleted]