Rover designer here. The weight at the destination is important to characterize performance but it’s not a big driver of design. For example, once you consider

Rover designer here. The weight at the destination is important to characterize performance but it’s not a big driver of design. For example, once you consider losses due to friction inside gearboxes, there’s no big difference to size a motor. You want to be able to test on Earth easily anyway, so you wouldn’t design without a margin to allow that. I suppose if you designed a rover for Uranus you might take a different approach. Launch mass is important as a constraint, but the launch environment is the main design driver for mass. The rover must be much stiffer than the rocket to not “couple” it’s response. The first vibration mode (think tuning fork) of a rocket is about 20Hz so the spacecraft inside needs a first vibration mode higher than 40Hz. Something inside the spacecraft similarly needs a first vibration mode higher than 60Hz or 80Hz, although you can make exceptions based on analysis. But that’s not all, the sustained load on components during launch can easily be 10 to 30 times gravity (30G) and the instantaneous load can be 100G. You can’t just add material for these kinds of loads, it would be an endless feedback loop because adding mass decreases stiffness. Look closely and you’ll see that every deployable or movable part of the rover is locked down by a mechanism until it has landed.