2 ms·
Look at a modern motherboard. See how thick the RAM bus is? On my X370 motherboard it's over 10 cm thick and goes down to around 3 cm thick as it goes through v
by sudosysgen 6y ago
Look at a modern motherboard. See how thick the RAM bus is? On my X370 motherboard it's over 10 cm thick and goes down to around 3 cm thick as it goes through vias.
For your chip to interface, you'd have to reroute all those traces to it (because RAM is random access, you wouldn't have the context necessary to know when to inject or modify if you weren't accessing most of the traces).
On an X-ray of the motherboard, you'd see all those traces converge to a point, then diverge back onto the socket. On a normal motherboard x-ray[1], you see the traces make a trapezoidal pattern.
Such tampering would be immediately visible to a motherboard x-ray. And by the way, they would likely be detectable by software too, even just the delay introduced by the length of the traces is detectable.
[1]: https://www.sciencephoto.com/media/521584/view/computer-motherboard-x-ray https://www.sciencephoto.com/media/521584/view/computer-moth...
In addition, you'd actually need to have the die also process the data from memory, and it would need to be quite a bit faster than the relatively slow Ryzen memory subsystem.