4 ms·
What sort of exotic signal processing solution would be required to support 20GHz of bandwidth at any useful sampling rate and bit depth? How would you actually
by bob1029 6y ago
What sort of exotic signal processing solution would be required to support 20GHz of bandwidth at any useful sampling rate and bit depth? How would you actually collect a meaningful amount of information from every station in range simultaneously?
I feel like this is something that may be possible in physics, but is not well supported in practical applicability. The amount of signal processing hardware required to support this in the field should be a deal breaker with modern hardware, unless there are some really strong constraints regarding the bands & modulation schemes actually being monitored simultaneously.
Assume 40GHz sample rate for bare minimum no aliasing over the 20GHz spectrum, 8 bits per sample. You will wind up with ~320Gbps of data to deal with.
- insert_coin 6y agoA quantum signal processor of course! It is however 5-10 years away.
- dogma1138 6y agoAsk Keysight https://www.keysight.com/en/pdx-2935683-pn-UXR0802A/infiniium-uxr-series-oscilloscope-70-ghz-4-channels?cc=GB&lc=eng https://www.keysight.com/en/pdx-2935683-pn-UXR0802A/infiniiu... That said most signal processing scopes at high frequencies are analogue, so you are dealing with Giga Samples / Second not bps. But yes to to make sense of the actual data it would require some serious networking and storage but that might not be necessary for many applications.
- mhh__ 6y agoOnce you have performed the sampling, or even before that technically, information theory provides the connection between the analogue and the digital. > That said most signal processing scopes at high frequencies are analogue I think the state of the art is DC to a few (10s?) GHz with direct sampling, impressive stuff.
- Junk_Collector 6y agoBy direct sampling do you mean non-interleaved? The UXR oscilloscope he linked has a set of 256 Gsample/sec digitizers which can do the full DC to 110GHz on all 4 channels.
- mhh__ 6y agoClearly I'm not up to speed then - although I had in mind one I might one day be able to buy myself as opposed to be the absolute tail end of T&M equipment worth selling.
- dogma1138 6y agoYeah that scope alone costs over $1M, the probes for it probably cost more than what most people would or could pay for their house.
- blihp 6y agoThe main application would seem to be no longer needing to scan the spectrum for activity... you'd continuously be scanning (effectively) all of it simultaneously. A least one useful bit information you'd be obtaining from this is simply where in the spectrum activity is occurring.
- leeoniya 6y ago"hold my beer" -- CERN https://hackaday.com/2020/05/14/crunching-giant-data-from-the-large-hadron-collider/ https://hackaday.com/2020/05/14/crunching-giant-data-from-th...
- rthomas6 6y agoFPGAs, basically.