3 ms·
Are you sure about the necessary regeneration? Let me hand wave from the dark skies here for a moment: 1.) Think of the precision mirrors in the so often menti
by LargoLasskhyfv 6y ago
Are you sure about the necessary regeneration? Let me hand wave from the dark skies here for a moment:
1.) Think of the precision mirrors in the so often mentioned EUV-lithography equipment from ASML for latest generation chips from TSMC.
2.) Now imagine something like that on board of a satellite, maybe smaller.
3.) Have 2.) moveable with sufficient precision to bounce the rays from satellite to satellite in realtime, without having to regenerate them in any way for about 4 to 5 hops.
4.) problem solved by purely 'optical' mesh while signal is 'in orbit'.
kthxbaiiii!
- morei 6y agoThose 'precision EUV mirrors' achieve a reflectance of about 70% i.e. they aborb ~30% of the EUV light that reaches them. :) More seriously, those mirrors are special because they use bragg reflectors to handle 13.5nm light. They're not special for their precision, nor their reflectance. Setting that aside, the major problem with your proposal is that laser still have significant bream spreading. So the mirrors would need to be large enough to encompass a spread beam at every step, which adds weight and volume for both the mirror and the tracking mechanism. The tracking mechanism is particularly problematic because moving mass on a satellite affect the attitude, so you either need precision counterweights to null it out, or large reaction wheels. Using MEMS mirrors instead would solve some of the mass issues, but MEMS mirrors have very limited tracking (typically limited to a single axis) which would probably render them impractical. Far, far easier to just send and receive the signal at every step.
- LargoLasskhyfv 6y agoHrm. Taken from https://www.asml.com/en/technology/lithography-principles/lenses-and-mirrors https://www.asml.com/en/technology/lithography-principles/le... : > Flatness is crucial. The mirrors are polished to a smoothness of less than one atom’s thickness. To put that in perspective, if the mirrors were the size of Germany, the tallest ‘mountain’ would be just 1 mm high. edit: What I meant to say was rather something with that precision reflecting whichever wavelengths are used for laser communications. Which would be infrared, I guess? Or are we talking Maser?
- mmmBacon 6y agoWhile an interesting idea, I think you’ve greatly understated the problem. First, lasers and coherent light beams diverge, light cannot stay perfectly collimated and it’s not really possible to collimate well over such long distances. So the receiver, >10,000km away, will “see” only a small cross-section of beam. The efficiency of this is defined by something called the overlap integral between the areas of the beam and the detector. Think of it like the amount of light from a flashlight that gets through a pinhole in a sheet of paper. This reduces the available signal power significantly. If you introduce mirrors you have the mirror loss plus the vignetting losses for each bounce. This is likely much worse.
- LargoLasskhyfv 6y agoBut the reciever won't be be > 10,000km away in the configuration I mentioned. 4 to 5 'hops', remember? edit: arrgh, forget it... one beam, reflected multiple times until 'end of the line', got it...(sigh)
- ballenf 6y agoSo slightly concave mirrors?
- LargoLasskhyfv 6y agoWould have to be adaptive as in shapeshifting, since the distances between the involved satellites would differ, depending on the path?