5 ms·
It's great but until someone comes up with something better than 'solder on a screen, 3d print a case' it's going nowhere for lack of critical mass. The best th
by anigbrowl 6y ago
It's great but until someone comes up with something better than 'solder on a screen, 3d print a case' it's going nowhere for lack of critical mass. The best thing that could happen to this is if it turned from a $35 project into a $50 product. I know a bunch of people who find it interesting and would be into investing in deployment (as backup comms for natural disaster scenarios), but nobody wants to commit to soldering 50 of these things.
- bordercases 6y agoHow long would it take per unit?
- anigbrowl 6y agoNot very, but the point is that the necessity to set up an assembly line is a sticking point for adoption. You need to deploy a lot of these to make it useful so skill or time bottlenecks are a big disincentive.
- snops 6y agoThere is hardware available with the same microcontroller (ESP32) in a thick watch style case, but I don't know if anyone has ported meshtastic to it yet. On the face of it, power usage looks a bit higher due to the LCD display rather than OLED. https://www.aliexpress.com/item/10000161655843.html https://www.aliexpress.com/item/10000161655843.html
- boschetto 6y agoI am considering it. From a quick calculation (micro-production, 1 man operation, 50 units batch): - Materials: considering the best supported module (T-Beam V1.1 w/ NEO-M8N /w SX1262) with an OLED screen, an upgrade to a decent GPS antenna (ceramic, 28mm^2), 3D printed case and 2 Panasonic 18650. Materials cost: 48€/piece. - Assembly: pipelining would probably be bottlenecked by display soldering (outsourcing the 3D printing). Batching soldering could bring that down to ~1 min/piece. Flashing/testing can be fully automated and parallelized with soldering. Final assembly should be an additional 30s/piece. Start up ~10min considering testing machine boot and soldering iron warm up. Assembly time: 85 min/batch --> <2 min/unit Assembly cost (50€/hour): 71 €/batch -> 1.42 €/unit Shipping (EU): 10€ Support cost: can't estimate well, let's say 1€/unit Defective cost (10%): 13€/unit (2 procuct units, 3 shippings) Cost per unit: 73€ Retail price (40% margin): 102€ It's viable but pretty expensive (a lot more than 50$). For sure more expensive than a goTenna Mesh and offering less support. I won't make money from it but it could be a good learning opportunity. edit: formatting
- dopidopHN 6y agoI would buy one, as well as few naked one that I would solder myself. Those things could become very nifty. Solving problems that mesh-wifi can't quiet get right for organic deployment.