3 ms·

That would explain it. Do you recommend any docs/links I should read about allocating queues for polled IO?

• anarazel 6y ago
  It's terribly documented :(. You need to set the nvme.poll_queues to the number of queues you want, before the disks are attached. I.e. either at boot, or you need to set the parameter and then cause the NVMe to be rescanned (you can do that in sysfs, but I can't immediately recall the steps with high confidence).
  • anarazel 6y ago
    Ah, yes, shell history ftw. Of course you should ensure no filesystem is mounted or such: root@awork3:~# echo 4 > /sys/module/nvme/parameters/poll_queues root@awork3:~# echo 1 > /sys/block/nvme1n1/device/reset_controller root@awork3:~# dmesg -c [749717.253101] nvme nvme1: 12/0/4 default/read/poll queues root@awork3:~# echo 8 > /sys/module/nvme/parameters/poll_queues root@awork3:~# dmesg -c root@awork3:~# echo 1 > /sys/block/nvme1n1/device/reset_controller root@awork3:~# dmesg -c [749736.513102] nvme nvme1: 8/0/8 default/read/poll queues
    • tanelpoder 6y ago
      Thanks for the pointers, I'll bookmark this and will try it out someday.