5 ms·

What's a reliable company for multi-AP setups that also respect my privacy? Ubiquity had that whole phone home scandal.. Eero I'm not sure yet. I have pfSense

What's a reliable company for multi-AP setups that also respect my privacy? Ubiquity had that whole phone home scandal.. Eero I'm not sure yet. I have pfSense for the routing but now just need access points. So far I've been using an old Asus ac86u on Merlin as an AP but the reception is not great in other rooms due to the fact that walls in my apartment are concrete with rebar.

LeoPanthera 6y ago
I use a pfSense+UniFi combo. I know about the scandal, but they added an option for the user to control it and as far as I know, they haven't done anything questionable since - software quality aside. (Actually I know the internet loves to bitch about Ubiquiti but my experience has been just fine. Maybe it's because I don't have a Unifi router.)
- nicolas_t 6y ago
  Yeah, it might be an overreaction but the fact they did that does show that they have people who are clueless in their company and don't respect their customers Given the target market of their product I would expect any such attempt to be quickly found so I guess there's not that much risk to use them
dialamac 6y ago
CommScope Ruckus?
asdff 6y ago
I've seen a few articles that use a raspberry pi in fact
chenxiaolong 6y ago
I'm looking for the same as well. I've heard good things about actual enterprise APs, though they seem to be quite expensive. Ruckus APs are 4x the price of my current Ubiquiti APs. I'll probably do more research into this when Wi-Fi 6E becomes more commonplace. For now, I just block outbound internet access on the management network for my Ubiquiti APs and controller.
dddw 6y ago
Mikrotik. Maybe?
r1ch 6y ago
If you can live with only 802.11ac, I've had great results flashing OpenWRT onto Mikrotik wAP AC boards. Performance peaks at about ~400mbps TCP throughput at 2x2 MCS-9. WPA3 works without problems. For multi-ap, setting up 802.11r is fairly straightforward, k/v requires some custom scripting to generate the neighbor reports. Be careful not to get the new revision with the two chain radio as the chipset is different and not yet supported by OpenWRT.
- hackmiester 6y ago
  I just use the wAP ac (and cAP ac) as-is. I don't feel compelled to install OpenWrt.
  - r1ch 6y ago
    They're great devices even with the stock firmware, but their wireless drivers are quite dated (no wave2 support, no WPA3, no 802.11r/k/v). They do have a beta package with wave2 support but it's not supported on the low RAM devices like cAP / wAP AC.

LeoPanthera 6y ago

I use a pfSense+UniFi combo. I know about the scandal, but they added an option for the user to control it and as far as I know, they haven't done anything questionable since - software quality aside. (Actually I know the internet loves to bitch about Ubiquiti but my experience has been just fine. Maybe it's because I don't have a Unifi router.)

nicolas_t 6y ago
Yeah, it might be an overreaction but the fact they did that does show that they have people who are clueless in their company and don't respect their customers Given the target market of their product I would expect any such attempt to be quickly found so I guess there's not that much risk to use them

dialamac 6y ago

CommScope Ruckus?

asdff 6y ago

I've seen a few articles that use a raspberry pi in fact

chenxiaolong 6y ago

I'm looking for the same as well. I've heard good things about actual enterprise APs, though they seem to be quite expensive. Ruckus APs are 4x the price of my current Ubiquiti APs. I'll probably do more research into this when Wi-Fi 6E becomes more commonplace. For now, I just block outbound internet access on the management network for my Ubiquiti APs and controller.

dddw 6y ago

Mikrotik. Maybe?

r1ch 6y ago

If you can live with only 802.11ac, I've had great results flashing OpenWRT onto Mikrotik wAP AC boards. Performance peaks at about ~400mbps TCP throughput at 2x2 MCS-9. WPA3 works without problems. For multi-ap, setting up 802.11r is fairly straightforward, k/v requires some custom scripting to generate the neighbor reports. Be careful not to get the new revision with the two chain radio as the chipset is different and not yet supported by OpenWRT.

hackmiester 6y ago
I just use the wAP ac (and cAP ac) as-is. I don't feel compelled to install OpenWrt.
- r1ch 6y ago
  They're great devices even with the stock firmware, but their wireless drivers are quite dated (no wave2 support, no WPA3, no 802.11r/k/v). They do have a beta package with wave2 support but it's not supported on the low RAM devices like cAP / wAP AC.