4 ms·

I've tried this a few times and none of the ovens I've had over the years have been successful in removing seasoning with their self-cleaning, so at this point

by mdtusz 6y ago

I've tried this a few times and none of the ovens I've had over the years have been successful in removing seasoning with their self-cleaning, so at this point I'm trying to find a machine shop that will be happy to bead blast it and mill the surface flat again. So far, most shops have given me quotes in the hundreds of dollars so I've been waiting until I meet someone that has the capability to just do it in their garage. Most new cast iron cookware now has a raw surface with lots of pits and bumps from the casting process as well, which doesn't seem to get nearly as smooth and non-stick as "vintage" cookware.

chipsa 6y ago
Self cleaning should reach a high enough temp for it, because most of what you use the self-cleaning to take off is effectively seasoning. If it's not getting hot enough, use something else to get it hot enough (blowtorch, maybe). For smoothing out the surface, you could just use a flapwheel. You can get them for angle grinders. This will also take off seasoning if necessary (but it's a bit worse for the pan if you're not also trying to smooth it out). Be sure to wear a respirator and googles if you're doing this.
captrb 6y ago
I used a propane grill and it was very, very effective. I removed the grates and (if I recall correctly) rested the pan on the heat deflection sheets. I left all burners on for about 2 1/2 hours. After cooling, the previous coating was reduced to a thin dust. After blowing it off, the pan was gun metal grey. I then used a cheap corded drill and inexpensive flap wheels and similar attachments from the hardware store to make it smooth, wearing an N95 mask to protect my lungs.
slacka 6y ago
Since quarantine life, I've been cooking multiple times a day. My oven's self-clean makes my pans look exactly like new. Takes all of the black off leaving them with a shiny, silvery shine. I then have to season them to regain a nonstick coating as good as any Ceramic/Teflon pan that I've used. As far soap. My experience is that it definitely damages the nonstick coating, depending on how much you use. You can get by with a soapy sponge, but putting detergent directly on it and the nonstick coating will be lost. The best way to avoid need to avoid soap or scrubbing and re-seasoning is to put hot water in the pan while it's still hot and scrape. Meat is the worst for leaving a coating and this technique removes 99% of it.(If not blackened use that water for a delicious sauce with all the best flavors of your cooking). This routine allows me to use the same pan for months without a deep cleaning. I have tried to put cold oil on after heaving soaping, but I'm not happy with the pan until I season it with high heat. The only reason I'd do it for rust and still would pan on seasoning it properly later.
- ethbr0 6y ago
  The biggest difference I've found (moreso on stainless steel than cast iron) is food weight: which is to say, time food is left without moving. Which makes sense. Essentially burnt-to-pan bits are food-pan interface, as opposed to food-oil-pan interface. Give enough time, heavy food displaces oil and comes in direct contact with pan. Given enough movement, oil is able to reimpose itself between the two.
jnellis 6y ago
Our dog's food bowl is about the most mirror polished metal in the house. Free labor.
- ethbr0 6y ago
  Just wait until you diamond-grit-coat Fluffy's tongue...
BikiniPrince 6y ago
You can stick the pan in a bag, spray on some easy off and let it soak overnight.

by mdtusz 6y ago

chipsa 6y ago

Self cleaning should reach a high enough temp for it, because most of what you use the self-cleaning to take off is effectively seasoning. If it's not getting hot enough, use something else to get it hot enough (blowtorch, maybe). For smoothing out the surface, you could just use a flapwheel. You can get them for angle grinders. This will also take off seasoning if necessary (but it's a bit worse for the pan if you're not also trying to smooth it out). Be sure to wear a respirator and googles if you're doing this.

captrb 6y ago

I used a propane grill and it was very, very effective. I removed the grates and (if I recall correctly) rested the pan on the heat deflection sheets. I left all burners on for about 2 1/2 hours. After cooling, the previous coating was reduced to a thin dust. After blowing it off, the pan was gun metal grey. I then used a cheap corded drill and inexpensive flap wheels and similar attachments from the hardware store to make it smooth, wearing an N95 mask to protect my lungs.

slacka 6y ago

Since quarantine life, I've been cooking multiple times a day. My oven's self-clean makes my pans look exactly like new. Takes all of the black off leaving them with a shiny, silvery shine. I then have to season them to regain a nonstick coating as good as any Ceramic/Teflon pan that I've used. As far soap. My experience is that it definitely damages the nonstick coating, depending on how much you use. You can get by with a soapy sponge, but putting detergent directly on it and the nonstick coating will be lost. The best way to avoid need to avoid soap or scrubbing and re-seasoning is to put hot water in the pan while it's still hot and scrape. Meat is the worst for leaving a coating and this technique removes 99% of it.(If not blackened use that water for a delicious sauce with all the best flavors of your cooking). This routine allows me to use the same pan for months without a deep cleaning. I have tried to put cold oil on after heaving soaping, but I'm not happy with the pan until I season it with high heat. The only reason I'd do it for rust and still would pan on seasoning it properly later.

ethbr0 6y ago
The biggest difference I've found (moreso on stainless steel than cast iron) is food weight: which is to say, time food is left without moving. Which makes sense. Essentially burnt-to-pan bits are food-pan interface, as opposed to food-oil-pan interface. Give enough time, heavy food displaces oil and comes in direct contact with pan. Given enough movement, oil is able to reimpose itself between the two.

jnellis 6y ago

Our dog's food bowl is about the most mirror polished metal in the house. Free labor.

ethbr0 6y ago
Just wait until you diamond-grit-coat Fluffy's tongue...

BikiniPrince 6y ago

You can stick the pan in a bag, spray on some easy off and let it soak overnight.