3 ms·

Huh. That's not it at all for me. I like cast iron because: (1) It is extremely durable and can be repaired rather than replaced. (2) It is general purpose, red

Huh. That's not it at all for me. I like cast iron because: (1) It is extremely durable and can be repaired rather than replaced. (2) It is general purpose, reducing the number of pans I need to own. (3) It is well suited to cooking at low temperatures, which are much more forgiving (I can walk away and write a comment like this and come back to something other than a charred mess). edit: I discovered cast iron about a year ago and now I do roughly 90% of my cooking on it. If there were reliable, science-based information about how to care for the pan best, it would have saved me a lot of trouble. As an example, a lot of people caution against seasoning with too much oil. They say that when you season your pan (e.g. initially, in the oven), you should wipe the oil off until the pan looks dry. I took this literally, and wiped until it looked the same as before I put on the oil. As a result, my seasoning had approximately no effect. After experimenting, I've decided that the "looks dry" advice isn't wrong exactly, but "dry" needs clarification. It should look more like how you would like it to look when it comes out of the oven — dry, but darker and with more sheen.

CBLT 6y ago
Have you tried carbon steel? In my opinion it is superior to cast iron in every way, especially durability.
- smichel17 6y ago
  Not yet. I plan to at some point.
- petre 6y ago
  I like bith. Carboon steel for the pancake and omlet pan and cast iron for the steak pan. Cast iron has more thermal mass. I should probably also get a cast iron pot for cooking stew.
- zelon88 6y ago
  I have a Blackstone carbon steel griddle and it is very nice. A little uneven but it gives me areas to keep stuff warm around the outside.
- leetcrew 6y ago
  as materials, carbon steel and cast iron are extremely similar, except that carbon steel can be stamped rather than cast. in practice, this means that carbon steel skillets tend to be much thinner than cast iron ones. durability would not be an advantage I would attribute to the typical carbon steel skillet. a cast iron skillet is pretty much indestructible; if you drop it from stove-height, it would be more likely to damage your floor than to shatter. a carbon steel skillet can easily warp if you heat it up too quickly, which is not nearly as great a concern with a heavy cast iron skillet. I have a cast iron and a carbon steel skillet. I will always reach for the cast iron to sear a steak, but the carbon steel skillet gets used for pretty much everything else.
- linsjack 6y ago
  I also like both, I have a hand-me-down Cast Iron that I love for skillet baking and nostalgia but I also have a few pieces of Made In Carbon Steel that I use more often as they're lighter and less of a pain to season and maintain.
war1025 6y ago
> If there were reliable, science-based information about how to care for the pan best, it would have saved me a lot of trouble I think the trouble here is that the people who best understand cast iron are probably also the least likely to care about the science of it. The main reason not to leave too much oil in the pan is that it will go rancid and get sticky and generally gross. That's not something you run up against if you use the pan several times a week, but if you have something like a dutch oven that you use maybe once or twice a month, you will come back to a mess that you have to deal with before you can cook in it. The whole "you're making a polymer coating that mimics a teflon pan" idea is something that sounds fancy, but is impractical and unnecessary in practice.
- smichel17 6y ago
  > I think the trouble here is that the people who best understand cast iron are probably also the least likely to care about the science of it. Hmm. Perhaps. I said science-based information because while I find the science (chemistry, polymerization, etc) of cast iron interesting, I primarily care about the results. For example, knowing that flax oil gives the non-stickiest finish but is prone to flaking and thus high maintenance. Perhaps empirical would have been a better word than science-based. I suspect there are a fair number of people like me, who would like to know more about the trade-offs involved in different oils and maintenance procedures. But perhaps these aren't the people who best understand cast iron, as you say. Two things of note: - The best answer in the FAQ in the top comment of this thread, by FAR, is #2, about heat spreading. It gives numbers and additional information (about radiating the heat) that I didn't know before. - Flax is the only oil that I understand even some of the trade-offs of using. That is a direct result of the post linked in this thread publicly making a hypothesis and providing detailed-enough steps for (some people) to reproduce its results. Speaking of, as a cast iron enthusiast, would you be willing to share your experiences and/or do some experiments to help test my hypothesis on cleaning methods, here? https://news.ycombinator.com/item?id=25716850 https://news.ycombinator.com/item?id=25716850

CBLT 6y ago

Have you tried carbon steel? In my opinion it is superior to cast iron in every way, especially durability.

smichel17 6y ago
Not yet. I plan to at some point.
petre 6y ago
I like bith. Carboon steel for the pancake and omlet pan and cast iron for the steak pan. Cast iron has more thermal mass. I should probably also get a cast iron pot for cooking stew.
zelon88 6y ago
I have a Blackstone carbon steel griddle and it is very nice. A little uneven but it gives me areas to keep stuff warm around the outside.
leetcrew 6y ago
as materials, carbon steel and cast iron are extremely similar, except that carbon steel can be stamped rather than cast. in practice, this means that carbon steel skillets tend to be much thinner than cast iron ones. durability would not be an advantage I would attribute to the typical carbon steel skillet. a cast iron skillet is pretty much indestructible; if you drop it from stove-height, it would be more likely to damage your floor than to shatter. a carbon steel skillet can easily warp if you heat it up too quickly, which is not nearly as great a concern with a heavy cast iron skillet. I have a cast iron and a carbon steel skillet. I will always reach for the cast iron to sear a steak, but the carbon steel skillet gets used for pretty much everything else.
linsjack 6y ago
I also like both, I have a hand-me-down Cast Iron that I love for skillet baking and nostalgia but I also have a few pieces of Made In Carbon Steel that I use more often as they're lighter and less of a pain to season and maintain.

war1025 6y ago

> If there were reliable, science-based information about how to care for the pan best, it would have saved me a lot of trouble I think the trouble here is that the people who best understand cast iron are probably also the least likely to care about the science of it. The main reason not to leave too much oil in the pan is that it will go rancid and get sticky and generally gross. That's not something you run up against if you use the pan several times a week, but if you have something like a dutch oven that you use maybe once or twice a month, you will come back to a mess that you have to deal with before you can cook in it. The whole "you're making a polymer coating that mimics a teflon pan" idea is something that sounds fancy, but is impractical and unnecessary in practice.

smichel17 6y ago
> I think the trouble here is that the people who best understand cast iron are probably also the least likely to care about the science of it. Hmm. Perhaps. I said science-based information because while I find the science (chemistry, polymerization, etc) of cast iron interesting, I primarily care about the results. For example, knowing that flax oil gives the non-stickiest finish but is prone to flaking and thus high maintenance. Perhaps empirical would have been a better word than science-based. I suspect there are a fair number of people like me, who would like to know more about the trade-offs involved in different oils and maintenance procedures. But perhaps these aren't the people who best understand cast iron, as you say. Two things of note: - The best answer in the FAQ in the top comment of this thread, by FAR, is #2, about heat spreading. It gives numbers and additional information (about radiating the heat) that I didn't know before. - Flax is the only oil that I understand even some of the trade-offs of using. That is a direct result of the post linked in this thread publicly making a hypothesis and providing detailed-enough steps for (some people) to reproduce its results. Speaking of, as a cast iron enthusiast, would you be willing to share your experiences and/or do some experiments to help test my hypothesis on cleaning methods, here? https://news.ycombinator.com/item?id=25716850 https://news.ycombinator.com/item?id=25716850