6 ms·
> But it’s part of the answer isn’t it? Before: One flaky wifi connection between AP and client. After: Two wifi connections, both of which must work. Using a
by michaelt 6y ago
> But it’s part of the answer isn’t it?
Before: One flaky wifi connection between AP and client.
After: Two wifi connections, both of which must work. Using a combination of operating conditions, AP and client that have proved unreliable in the past.
Now with no visible status for the middle link, and a second DHCP server on the repeater, handing out conflicting addresses when the middle link is down.
- ivanbakel 6y agoThe typical home setup guide tells you to disable DHCP on your repeater and delegate to the original box. I was told to do that when I set up something similar due to living in a U-shaped apartment with no nice central position for the router.
- michaelt 6y agoNaturally DHCP is handled by the original network when the original network can be seen, yes! But if the original network is unavailable - perhaps the SSID has changed for example - you need to be able to get to the repeater's configuration page somehow. And the user can't google their problems or download any configuration tools while their connection is down, so you'd better make it simple. So many devices like this will be transparent under normal operation, but if there's a network problem will start their own DHCP server.
- jschwartzi 6y agoAnd depending on how they detect “down” they may also start the DHCP server under normal conditions.