3 ms·
You can’t access that web interface from the internal network as the Vigor 130 is not a router. Unless someone has a fancy trick I’m missing I have to disconnec
by robotmay 6y ago
You can’t access that web interface from the internal network as the Vigor 130 is not a router. Unless someone has a fancy trick I’m missing I have to disconnect my router and connect a laptop directly to the modem with a fixed IP to access it, unfortunately. The Vigor 130 is really more of a PPPoA to PPPoE converter, or at least, that’s how it’s commonly used.
- mig39 6y agoCould you put a dumb switch between the Vigor and your LAN? And have the Raspberry PI be connected with a fixed IP directly to the modem? Then you could use WiFi to talk to the PI?
- robotmay 6y agoInteresting idea! It might be possible; I haven’t touched the thing since first configuring it a few years ago so I’m a bit fuzzy on how exactly the interface works.
- tgpc 6y agovigor 130 - not the full web interface, but... try wireshark on it if you have the right setting enabled, you'll find it is broadcasting its status onto the network for you to pick up vigor's routers use this info. to show line speed etc. when using a modem via the router
- robotmay 6y agoOoh this is good to know, thank you!