4 ms·
I think they're also popular because * people have wood anyway so they might as well use it for something * it often suits the design of houses here which wer
by chrisseaton 6y ago
I think they're also popular because
* people have wood anyway so they might as well use it for something
* it often suits the design of houses here which were historically built for a central stove burner like this
* many people have wood-burning stoves for cooking that are extremely large and heavy permanent fixtures in their kitchen and cannot easily be removed or adapted and are designed to permanently be burning wood so you can't really turn them off either
* people like the smell and aesthetic (note this article is in just about the most middle-class publication there is in the UK)
- aqrit 6y agoOutdoor wood furnaces (boilers) became very popular over the last 15 years. They are cheaper than fuel oil. A traditional wood stove has to be refilled every 2 hours (or so), and is also a major fire hazard. "Wood burners" may also include pellet stoves which are also increasingly popular for similar reasons.
- chrisseaton 6y agoCan't say I've ever seen an outdoor boiler in a home counties garden. But maybe you're talking about something specific?
- aqrit 6y agowww.central-boiler.co.uk ?
- throw0101a 6y agoThree minute video: * https://www.youtube.com/watch?v=_PL0yBdvSxA https://www.youtube.com/watch?v=_PL0yBdvSxA 12 minute video from an owner: * https://www.youtube.com/watch?v=WQc8p-roy-E https://www.youtube.com/watch?v=WQc8p-roy-E Popular for off-grid situations.
- cjenken 6y agoI have an outdoor wood furnace. It's great at cutting down smoke as it has a re-burner section that keeps the temperature high enough that their is almost no smoke once it gets up to temperature. But there is a lot more maintenance with something like this. I have to have about 6 cords of wood to make it through winter (which mostly comes off my property) but that also means handling the fuel (bucking and then splitting the wood as well as having the space to let it season for a year to dry it). Filling up the furnace once or twice a day depending on the weather. Cleaning out the ash once a month. And now that it's getting older (8 years) I have to fix up some of the welds inside the main chamber. I don't mind the extra work as it saves a lot of money in electricity bills and all that splitting of wood has been good exercise. But I wouldn't recommend it unless you have the time and energy to do the work.
- brnt 6y agoNo smoke, but what about particulate matter? I understand these efficient wood burners are major urban polluters even without the smoke. They sure don't seem to smell any less.
- cjenken 6y agoOnce the temperature within the furnace gets to about 900F I can't even really smell it anymore and the exhaust looks clear as far as I can tell in daylight. This is the benefit of using a large and well built wood furnace. Also all of the wood I use is dry which not only reduces the amount of bad stuff that gets into the air it also increases the usable heat from the wood. I also live in a very rural area on a 1 hectare lot surrounded by other 1 and 2 hectare lots. I would not want to run this in a typical suburb and I agree with most the other comments that wood burning really shouldn't be a thing in densely populated areas. Unfortunately for me my only other real option is electricity which can be relatively intermittent where I am and also expensive. It would end up costing $700-$1000 extra during winter months. I'm heating two homes with it. A newer one with walls at an R40+ rating and an older one with walls at a recently upgraded from nothing to an R20 rating. The money I'm saving on electricity will be going into add more insulation into the older home for even better long term benefits. Check out the below site if you'd like to learn a bit more about what the typical issues are and what's trying to be done to help reduce the problems. https://www.epa.gov/sites/production/files/documents/strategies.pdf https://www.epa.gov/sites/production/files/documents/strateg...
- throw0101a 6y ago> people like the smell and aesthetic (note this article is in just about the most middle-class publication there is in the UK) The problem here and described in the article is that people are not using direct vent stoves/fireplaces. What is being talking about are units that vent out a chimney/flue, but take the air for combustion from the house itself. This is not what you want for health or efficiency reasons. What you want is to take air from the outside, have it combust the fuel, and then be vented outside: * https://www.napoleon.com/en/ca/fireplaces/blog/how-direct-vent-fireplaces-work https://www.napoleon.com/en/ca/fireplaces/blog/how-direct-ve... * https://www.northcountryfire.com/blogs/news/what-is-a-direct-vent-gas-fireplace https://www.northcountryfire.com/blogs/news/what-is-a-direct... * https://www.youtube.com/watch?v=AKCwg8jwHd8 https://www.youtube.com/watch?v=AKCwg8jwHd8 The only thing that should enter the living space is radiant heat. Also: if the smoke exiting your fireplace/stove is dark (or even grey), then you have an inefficient unit. The exhaust air should be clear, as that means 'everything' has been burned. In the US, the now-mandated EPA BurnWise standard has stoves being between 60-80% efficient (depending on the design): * https://www.epa.gov/burnwise/frequent-questions-about-wood-burning-appliances https://www.epa.gov/burnwise/frequent-questions-about-wood-b... You can find people saying that they use one-half or even one-third of the wood that they used to after upgrading. Also a useful hint: if you're going to use one in a domicile where you live for long periods of time, it may be worth looking at soapstone designs, as they retain heat more (though warm up is longer). For shorter periods, e.g., in a cabin/cottage, then iron could be better as it heats/cools quicker, so that may be fine for a (long) weekend stay. For best results, regardless of heating method, make sure you make your domicile more airtight to reduce drafts, and increase insulation.
- balfirevic 6y ago> Also a useful hint: if you're going to use one in a domicile where you live for long periods of time, it may be worth looking at soapstone designs, as they retain heat more (though warm up is longer) Why would that matter? The amount of heat transferred to the living space is the same. I can see the benefit of radiating some residual heat when not active (for example, through the night) but that seems to be offset by the delay you'd have when you start it up again.