3 ms·

Note that this working will depend heavily on what usb-3 peripherals you're plugging in, and the exact resolution of your 4k monitors. a display at 3840x2160@6

Note that this working will depend heavily on what usb-3 peripherals you're plugging in, and the exact resolution of your 4k monitors. a display at 3840x2160@60hz will eat up about 19.8gbps. Two of them together will use 39.6gpbs. Thunderbolt 3 only supports 40gbps. So if you have peripherals that need anything more than basic mouse/keyboard (in my case, a decent webcam and a usb to ethernet adapter) this setup will fail.

dschuler 6y ago
I'm no video expert, so correct me if I'm wrong, but I thought you can do 3840x2160@60Hz video with 24bit/pixel with under 14.4Gbps, which is the HDMI 2.0 limit [0]. According to this [1], that signal would require 12.54Gbps, so with a link budget of 34.56Gbps - 2*12.65Gbps, you'd have about 9.48Gbps left over for USB and ethernet (which is on the PCI bus for this particular hub). I suppose these numbers include coding overhead for the physical link, but I can't say for sure. If you wanted more than 60Hz or more than 24bit/pixel, you'd definitely run out of bandwidth with two monitors and USB/ethernet. [0] https://en.wikipedia.org/wiki/HDMI#Version_2.0 https://en.wikipedia.org/wiki/HDMI#Version_2.0 [1] https://linustechtips.com/topic/729232-guide-to-display-cables-adapters-v2/?section=calc&H=3440&V=1440&F=120&calculations=show&formulas=show https://linustechtips.com/topic/729232-guide-to-display-cabl...